- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Excuse me but your question is not clear. May I understand that your battery won't charge and you need to replace it? If you can open the battery compartment, take note of type of the battery or even, you can remove it and go to a computer parts shop, indicating your battery, brand and model of computer.
now they have the fl300 and i cannot tell for sure what type of usb connection it has. As it shows on the website that there is a special usb connector the goes from usb-1/4" audio jack. But it also says it has mini usb connection. The device is listed as plug and play so if you plug it into your computer with the proper connection it will automatically connect and allow you transfer files. if it does not pop up then it is most likely the product is damaged.
here is link to there website. The website is only in Spanish.
do you have your USB cable? keep it connected to your computer that helps you to transfer files and charge it. device ill tell you when it's fully charged actually there is no charger for it.
if you need to read about it here is a link:
http://www.mpio.com/product/productview_fl350.html if it works for you don't forget to rate me thx
It's a reasonably straightforward task. There are 2 screws at either side (near the top) of the player. You'll need a small Alan-key to remove these. Once this is done, carefully prise off the back cover and you'll be able to see the battery - at the back. Just un-clip the battery cable. - You might want to check the connection in the first instance, if however, the battery needs replacing see replacment battery model number below: - UP325385A4H-UP325385A5H
I have the same problem. I can store things in it but can't see the screen. the LED seems to have died first the light went out then it just died.. This is the 3rd Mpio FL300 that did that to me. I returned the 2 others before the warranty was out but this time it's to late. how do we fix this problem in other words how do I get the led to work????????
either you got a faulty surface mount regulator IC or you got a corrupted flash memory. Try pressing play button, then alternately press volume down (-) and Rewind (<<) buttons. When the "FORMAT? Press Menu" appears, press MENU BUTTON. A LOW LEVEL FORMAT will be in progress. When it's done, reload firmware recovery using MPIO Utility.
If however you nothing appears on the screen afteryou pushed the play, rewind, and minus buttons,or still it doesn't power up, you've got a faulty regulator IC. It is the five pin chip colored black with the markings "PHK" (use a magnifying lens to confirm) located on the left besides the battery connector (facing up, with the earphone jack on the top). If you had micro soldering skills, then you can remove the chip and replace, if you can find a replacement...
I have an MPIO HD-200. Does Windows play the sound like you have something attached when you plug it in? Or does Windows not regognize it al all? Either way, I've had to play with mine after I've dropped it a couple of times. I charge the battery all the way, then just keep plugging and unplugging from the USB wire. The last time, it took 20+ times before Windows would recognize it.