Question about Husqvarna Sewing Machines
SOURCE: missing a foot pedal
Check with your local Husqvarna Viking dealer. That is what they are there for.
The foot control is a little pricey for that machine, but why would you want to take a risk on cheapening your experience with your machine that you "ADORE" by trying to take the cheap way out in getting a part for it.
Get what you need and continue to "ADORE" your machine.
Posted on Apr 09, 2009
SOURCE: I have a Viking 6690.
when you say "bobbin tension is loose" do you mean that the thread bunches up under the fabric? If yes, then your UPPER tension is wrong and it's probably not threaded correctly.
Posted on May 04, 2009
I hate to say it, but the 6690 was plagued with circuit board problems. That machine cost Viking a lot of heartache. I'm a bit surprised to see one still working. You didn't specify exactly what you did when cleaning or whether you took the covers off and disturbed the wiring. Check all the connections and plugs, but it might be dead. You can take it to a Viking dealer with experience with the 6690 for an evaluation.
Posted on Feb 21, 2010
The reverse mechanism has a tendency to stick in these machines. Unfortunately, putting oil on it will not make it come loose. You need to find an authorized dealer that knows your machine and they can take care of it for you. Some areas of this machine must be disassembled to be cleaned properly.
Posted on Oct 31, 2011
Tips for a great answer:
Aug 03, 2017 | Sewing Machines
Dec 21, 2014 | Sewing Machines
Oct 31, 2011 | Husqvarna Viking 1
Feb 21, 2010 | Sewing Machines
Jun 26, 2009 | Husqvarna Viking 1
Apr 17, 2009 | Husqvarna Viking 1
Oct 24, 2008 | Husqvarna Sewing Machines
56 people viewed this question
Usually answered in minutes!