Question about Kenwood Car Audio & Video
Posted by Anonymous on
SOURCE: kenwood dpx 4020
The iPod will stop itself from charging when the battery is full, and will not overcharge. I'm pretty sure you can't disconnect the power to the iPod (would stop it from charging) and still use the Audio to your stereo.
Posted on Aug 19, 2007
SOURCE: kenwood DPX 9000 MJ CDplayer
Start type the code on the face preset button only 1 to 4 to let it appear this number start from 3110 and press Play/Pause button. do itz until it's get to 3119.... the code is 3112 but it'z quite hard....
maybe ur rite!! solution num 2, put it in the trash!!!!
Posted on Nov 12, 2009
SOURCE: kenwood dpx-501
I just solved the problem with my kenwood dpx mp 2090U - (looks similar with 501). FL Display with single CD, USB, 2 Din.
I should share this......... as I received the clue from someone that share the same case to me . Thanks to Mr,Nasirbaek from Indonesia,
The problem is at the main board . Dry (bad) soldering occurred. There are more then 5 resistors in series configuration. The resistor is quiet big (1.5mm x 3.5 mm, surface mount type R) about 2,7Ohms.The position is start from near usb port cable and ended to near big transistor (1 x 1.5 cm power transistor). After resoldering check with multitester to make sure that all R are connected in series configuration.
Just open 3 screws to access the main board. 1 at the top case. 2 at cd assembly, then Carefully take out the CD and the CD ribbon cable.
Posted on Feb 21, 2010
Tips for a great answer:
Oct 19, 2008 | Kenwood Car Audio & Video
Jan 22, 2013 | Kenwood Dpx-u5120 Double Din Mp3 Cd Ipod...
Mar 22, 2012 | Car Audio & Video
Jan 11, 2012 | Kenwood Car Audio & Video
Jun 19, 2011 | Car Audio & Video
Oct 31, 2010 | Kenwood DNX5140 Car GPS Receiver
Jun 09, 2009 | Kenwood KDC-MP2035 CD Player
252 people viewed this question
Usually answered in minutes!