Question about Akai Televison & Video

Open Question

Watching usb video and akai menu keeps appearing at the top of screen - how can we stop this

Posted by Jodie Porter on

Ad

4 Related Answers

Anonymous

  • 147 Answers

SOURCE: top half of screen doesn't show video, just menu

replace the main pcb also called the digital pcb.you also could have a defective address or
buffer pcb that feeds the top of the screen if the top is black.if screen is not black.replace the main digital pcb.where all video is done in
the tv.

Posted on Jul 15, 2009

Ad
duane_wong

Duane Wong

  • 6826 Answers

SOURCE: Compaq Presario CQ40 Laptop screen flicker in

If a screen flickers it could be an inverter or a backlight problem. Not sure if it's cost effective to replace, though, in a laptop.

If it were a desktop, the video card could be added or replaced depending on whether the video function was on the motherboard or not.

Walmart is selling new laptops for $288 I saw this season that outperform a lot of computers from just a few years ago.

Posted on Nov 08, 2010

Ad

Anonymous

  • 2 Answers

SOURCE: My dvd & usb is not working. Everytime i put a

the parking brake wire must be connected to the parking brake system of you car. When the parking brake is engages, the LCD will be allowed to view your video. If not, the screen will produce an image saying, parking brake. this is a feature designed for the driver not to watch a video while driving. The video output on this unit will not be affected by this, el wire to connect is Pink - parking brake. this is wire connect with ground.

Posted on Nov 28, 2010

Jason W

  • 24 Answers

SOURCE: How do I use the video source button? I can see the different video inputs I can select on the screen after hitting the button but I can't move the cursor to select a different video source an

On Most TVs I have messed with, Hit the input or source button muliple times to cycle throught the different inputs. Also make sure there is an active device on the input for the TV to recognize it. Good luck

Posted on Jan 03, 2015

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Akai mpk broken conector

Its a lot simplifier than that really.. all you need to do is unsolder the old one and re-solder the new one.. The pins and connectors are standard.
8helpful
1answer

My dvd & usb is not working. Everytime i put a dvd in or try and use the usb a blue screen appears and says WARNING PLEASE STOP WATCH VIDEO PLAYER.

the parking brake wire must be connected to the parking brake system of you car. When the parking brake is engages, the LCD will be allowed to view your video. If not, the screen will produce an image saying, parking brake. this is a feature designed for the driver not to watch a video while driving. The video output on this unit will not be affected by this, el wire to connect is Pink - parking brake. this is wire connect with ground.
0helpful
1answer

No video on our tv

I found in the manual on page 13 bottom, that if you PRESS STOP buttom for 5 seconds of your remote controller then you can see the picture on the interlaced mode again on your TV.

Otherwise you have to connect you DVD to a unit that has progresiv scan, such as an HDTV, some computers if they have an input or to a projector .

I connected my DVD to a projector thru the VIDEO output and put eveything back to normal, and it is working fine now.




System Reset

Open CD disk tray. Press stop key and hold for 15 seconds, screen will appear.


5helpful
1answer

Why do a black patch appears in the center of the tv

Go into your setup menu and turn off closed captioning. The black square is a box for the text.
0helpful
1answer

My LCD tv's menu screen keeps popping up and won't stop.

Since it is brand new then should be OK.
Please return it to store and get another TV.
0helpful
2answers

Fuzzy picture on my 42" akai lcd tv

Check the menu ,,it should have a option ,,called convergenge ,,that realigns the colors,, and some tvs have geomagnetic correction,, good luck
0helpful
3answers

Akai model pdp4249g

Hello drifter,The design of the tv enables the auto search to detect any input signal you have selected. It could be TV (off air, video signals etc) so just switch on whatever inputs to the akai plasma befote you switch the Akai plasma on and let it do the work for you. just relax and watch the tv. recap 1. switch on the input eg video deck, DVD, VCD, or satellite dish. 2. switch on your AKAI PLASMA and 3. wait for the akai to search for your input signals. TRy this simple procedure and if it doesnt work just post back the message. The DON
0helpful
1answer

Akai DHT300 screen rolling

The picture is rolling because there is no sync signal in the composite output. Are you using the RCA jack or the S-video output? Is there another small TV you could hook up for a test to see if the problem appears there? If it does, then the Akai has the issue and needs to be examined further. If not, the TV input may have an issue. You didn't say what the TV is but there is the possibility the video input is looking for external sync from the DVD but that's a bit of a stretch. Can you feed a different source into the video input of the TV to see if you get the same result? Hope this helps.
Not finding what you are looking for?
Televison & Video Logo

Related Topics:

56 views

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Ekse

Level 3 Expert

13435 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...