Question about Audio Players & Recorders

Open Question

I'm having problem using A-Trac when sync recording. Tracks are not separated after setting Auto Trac from menue - indicator does not light up and there is no track separation

Posted by Taylor Bell on

Ad

5 Related Answers

Anonymous

  • 2 Answers

SOURCE: can curved tracks be purchased separately for Lemax village expre

Yes, I have even seen them on ebay from time to time.

Posted on Jan 03, 2009

Ad

Anonymous

  • 34 Answers

SOURCE: Recording guitar tracks on my computer are out of sync help

Most recording programs have a some way to keep tracks in sync. It is usually some type of begining and end marker. When you press record for the second track it starts the begining marker. What is the program your using?

Posted on Mar 14, 2009

Ad

SOURCE: When I record a vinyl album on a CD it all winds up on one track.

Pause each song for every recording to separate the tracks.

Posted on May 08, 2009

dunnbiker

David Dunn

  • 8546 Answers

SOURCE: I have a Phillips CDR 775 2 -disc cd recorder and

It's all in the manual...

20 seconds is the amount of digital 'silence' the machine will let pass during recording before it marks a new track. t will Pause and wait one minute for a digital signal to resume. (Page 21)

On digital copying it will automatically increment track numbers as the source advances.

For analog sources you should switch Auto Track to OFF and manually press Track as applicable. (Page 28)

Posted on Jan 21, 2011

dunnbiker

David Dunn

  • 8546 Answers

SOURCE: can you explain from square one how to record with

Several vids and tutorials....

http://www.google.com/#hl=en&tbs=vid:1&&sa=X&ei=P1g7TYXrI4qCsQOq-oyBAw&ved=0CE4QBSgA&q=Tascam+DP+01+video&spell=1&fp=6f0f197f8c83105e

searched for "Tascam DP 01 video"

Posted on Jan 22, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I play only one track at a time instead of the unit playing simultaneous tracks as I am an entertainer and want the unit to stop after each song please


HI THERE,YOU NEED TO RECORD THE SONGS ON TO THE DISK ONE AT A TIME,PAUSE THEN RECORD THE NEXT SONG.I AM AN ENTERTAINER AS WELL AND HAVE USED MINI DISK PLAYERS FOR 14 YEARS...HOPE THIS HELPS,CHEERS MARILYN 'ROJENE'.

Jan 17, 2011 | Sony MDS-JE520 Mini Disc Player

1 Answer

Maybe stupid question....is it possible to record 8 separate mono tracks on this thing? I cannot seem to select only track 5, 6, 7, or 8. When I try to record onto 5, for example, it is impossible to not...


I believe you have to adjust the levels DURING the bounce operation... I don't think you can do that after.

I would consider using a computer based editing program to handle more than 4 tracks...

Aug 30, 2010 | Fostex Mr 8hd CD 8 Track Recorder with CDr

1 Answer

Sound recordings from multiple sources out of sinc


It's called Latency. It takes an infinitesimal time to convert the digits into audio. It takes another infinitesimal time to convert your new audio into digits. Separately they are not much of a problem - together, as you've found, it is a problem. Pro an some semi-pro applications take this into account and you don't notice it at all. On cheaper kit and with cheapish software it is often not possible to fix unless you are recording separate tracks that you can slip into sync afterwards. - but then that sort of facility is not always available.

Feb 28, 2010 | Acer Computers & Internet

1 Answer

Can I record on more than two tracks at one time? I realize I have eight imputs, but can I record each of those on an individual track?


Simple answer = Yes. Make sure you have 2 mics plugged in two separate selected channels/tracks, arm the tracks then record. It will record both tracks. You can record up to 8 tracks at once using mics, guitars, etc.

Oct 22, 2009 | Tascam 2488 Portastudio Multitrack...

1 Answer

Recording guitar tracks on my computer are out of sync help


Most recording programs have a some way to keep tracks in sync. It is usually some type of begining and end marker. When you press record for the second track it starts the begining marker. What is the program your using?

Mar 14, 2009 | Dell Dimension 2400 PC Desktop

1 Answer

When I record a vinyl album on a CD it all winds up on one track.


Pause each song for every recording to separate the tracks.

Feb 23, 2009 | Denon CDR-W1500 2-Disc CD Recorder

1 Answer

Tascam 2488 Portastudio


To record the eight inputs onto 8 separate tracks at once simply plug your mics or other audio sources into the mic inputs (only 4 can be powered, A-E) and then assign each input to a separate track by pressing the input button which corresponds to one input and then the select button for the desired target track at the same time. Do this for all eight inputs and their target tracks. Then arm all eight tracks to record by pressing the record buttons on each (the red lights will come on). Then when you press play and record in the transport section (or use punch operations) you will record all eight inputs to all eight tracks at the same time.

Good luck.

bd.

Jul 06, 2008 | Tascam 2488 Portastudio Multitrack...

1 Answer

Need user manual


I have the CDR-200 and did not have the manual either. However, I did discover the same problem and found the solution. There is a "confirm" button on the front of the unit under the display area. After you press the record button "Record" will begin to flash in the display area and then you press "Confirm". It should start recording. Note however the following:

BURNING FROM EXTERNAL CASSETTE OR PHONO
Before starting this procedure make sure you have an AUDIO recording CD in the RECORDER tray of the CDR-200. A regular CD-R type of disc for computers is not going to work and may cause an annoying message on the display which does not go away until you put the right type of recording CD in the unit. It must be either an AUDIO CD-R or an AUDIO CD/RW.

1. When copying from an external cassette deck, you should set the source (press source button) until the setting is "Analog".

2. The "Dual" button should not be in effect. In the lower right portion of the screen you should only see a small number "1" with a circle around it. This indicates the CDs currently being used by the burner. In "dual" mode you can copy from the Playback CD of the CDR-200 to the Recorder CD. In dual mode you see "1" and "2" with circles around them. The active CD tray will flash on the display.

3. When copying from an external cassette unit, you use the "Record" button to start the recording. At the end of the cassette track you MUST press the STOP button by the CD Recorder tray. After you press STOP the unit will say "Update" which indicates it is closing out the track on the CD-R. You can continue to write tracks by pressing RECORD again, then CONFIRM when the tape is positioned at the right PLAYBACK track. It is usually helpful to have a few seconds of blank tape at the start of the PLAYBACK track before pressing RECORD. Press play on the cassette deck, then RECORD followed by CONFIRM on the CD burner.

4. When the track has finished burning you must press STOP to close the track on the CD-R. After you press STOP, the unit will display "Update" to indicate it is updating or closing the track. When the process completes, the unit will display the tracks it has written to the CD-R and will be ready for you to copy another track or FINALIZE the CD-R. When the unit is waiting after the STOP, you can change the cassette tape, reposition to a playback track and ready the playback tape for more recording. When the PLAYBACK tape is ready repeat STEP 3. Repeat steps 3 and 4 until you have about 14 or 15 tracks on the CD-R.

5. When you have finished recording about 14 or 15 tracks onto the CD-R, you will want to finalize the CD-R. Press the FINALIZE button, and then press the CONFIRM button. You will see the the unit start to display the progress of the finalize by advancing the level meters of the left and right channels in the display. When the unit is finished finalizing it will return to the number of tracks display for the CD-R. After finalizing the CD-R you can play it back to make sure the burn was successful. Be sure to wait for the tracks display before removing or playing the CD-R after the finalize is done. Removing before the finalize is done may damage the unit and may render the CD-R bad.

BURNING FROM THE PLAYBACK CD
Before starting this procedure make sure you have an AUDIO recording CD in the RECORDER tray of the CDR-200. A regular CD-R type of disc for computers is not going to work and may cause an annoying message on the display which does not go away until you put the right type of recording CD in the unit. It must be either an AUDIO CD-R or an AUDIO CD/RW.

1. Set the unit to "Dual" mode. As described above, you will see "1" and "2" with small circles in the lower right portion of the display.

2. Make sure the "Source" mode is set to "Analog" by repeatedly pressing the SOURCE button until it shows "Analog".
3. When copying from the PLAYBACK CD tray you will not use the RECORD button by the CD Burner tray. You will use the 'DUB" button just to the right of the display.

4. Put an audio CD in the PLAYBACK CD tray and press the skip track button ">>" until you arrive at the track you wish to record from. If the track you want to start at is track 1, then you don't need to skip tracks.

5. When positioned at the correct playback track, press the DUB button. The unit will show "CDR" and then "DUB" on the display. When it says "DUB" press the CONFIRM button. The unit will start recording. You can adjust the record level during the first few seconds to make sure you don't have the recording volume level set too high.

6. When the track is finished, you should see the unit indicate on the display "Update". This indicates it is closing the track and it should do this automatically. If it does not do this you may have to press STOP near the RECORDER Tray to force closing of the track. Usually the unit indicates "AUTO" in the display area and I believe that is what controls the automatic track numbering feature. I am not sure how the AUTO feature is turned on. I noticed on the CDR-200 it is on by default.

7. After the UPDATE is complete, the unit will display the number of tracks it has written to the CD-R. You can at this point change the PLAYBACK CD to another one or advance to another track for continued recording. When at the correct track simply go back to step 5 and continue.

8. When you are all done copying tracks from one or more CDs, and you wish to finalize the CD press FINALIZE and then press CONFIRM to start the finalize process. I noticed on the CDR-200 if you wait too long after recording a track the unit may start the finalize process automatically. This happened after at least 5 minutes. It is best to try and stay with the copy process to monitor what is happening. The finalize can also start if you have written to many tracks to the CD-R and it runs out of space. Typically, your safe if you burn about 14 to 15 tracks to a CD-R at a time. You might be able to fit more if the tracks are very short (2-3 minutes each).

One last note about the connections on the back of the unit. Read the labels of the connections on the back very carefully. The CDR-200 and probably the 201 have separate outputs for the PLAYBACK CD (CD) and BURNER CD (CDR). You will want to connect these to seperate inputs on your audio amplifier. Or you might also wish to merge them using adapters into one input on your audio amplifier. If you keep them separate you will need to change sources on the audio amplifier to hear each tray. For example, you might need to switch to "CD/TAPE" for the CD, and "AUX" for the CDR. It is probably easier to merge the two using audio adapters which can be readily obtained from RadioShack.

I hope this helps!

May 08, 2008 | Classic Electronics CDR201 CD Recorder

1 Answer

2488 to pro tools


There is no way to 'sync' with protools from the 2488. In order to use your 2488 tracks in protools you have to first export your tracks as wav files and move them to your computer via usb and then import them into protools.

To get Protools files into your Tascam 2488 you'll have to export your Protools files into mono wav files first. They must also have a sampling rate of 44.1KHz and can be either 16 or 24 bit. Then load these files into your 2488 via usb and import them into tracks on the 2488.

Nov 21, 2007 | Tascam 2488 Portastudio Multitrack...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...