Can I hook up my steroe speakers to the TV? I have an older model

Check your right and left balance. Make sure they are equal

I have researched on your issue and found that the Receiver is not capable of processing audio from HDMI input. It will bypass the signals from its HDMI input to HDMI output..
The Receiver has 3 HDMI input and one output. Hence you can use this as a HDMI switch to connect three HDMI devices to single HDMI port on the TV.
In order to get the sound from speakers connected to the Receiver, it is required to make alternate digital or analog audio connection.
You can confirm the information from the manual of the Home Theater System. Please refer page # 36 of the Manual to get the information. I have provided a link where you can download the Manual for the HT System:
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/580/580HT5100B.PDF

how do i hook up my stero to my dynex tv? stero has no hdmi cabl neither does my cd player. i also go through my cable box not high def Thank u for any help

instructions with pictures in this link

good luck with the installation

http://www.installdr.com/InstallDocs/Nissan/Altima.asp

It may help if you post the brand and model number of your stereo.

Use the TOSLINK - the optical/digital connector on both devices.

Disconnect the speakers and see what it does. If you were playing it very loud just prior to the failure it possibly overheated or blew up a speaker.

Make/model and any other clues you know would be VERY helpful.

Wild guess. Is the TV volume turned down and its output set to variable instead of fixed?

Go to your tv manufacturer's website to get instructions/manual.

Warning: make sure your TV has an audio OUT or OUTPUT, or you will not be able to hook stereo directly to TV and get it to work.

If the amplifier has inputs for a high level signal, you unhook the wires going into the speaker and plug them into the amp, then hook the outputs up to the speakers. If the amp only has rca inputs, you need to also buy a line level converter. Then you unhook the speakers, hook the wires up the the converter, then hook the converter up to the amp, then hook the amp up to the speakers.

Please leave good feedback!