Question about Jura Capresso Impressa E8 Espresso/Coffee Maker

2 Answers

Error Code 8 ? - Jura Capresso Impressa E8 Espresso/Coffee Maker

Posted by gradydorn on


2 Answers

Morten Bergendahl

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 60 Answers

The brew unit can`t move to the right position. This means usually that is full of used grounds and needs to be cleaned. Use your finger and clean out everything stuck inside, and then run the cleaning program. If this doesn`t help, contact your servicecenter, then it may be that the brew unit needs to changed or revised.

Posted on Aug 17, 2009

  • ghuhtama Nov 16, 2010

    We've had this problem with our Impressa E8 twice now. We sent it in for repair in January of, less than 12 months later it is hopelessly clogged again. Interestingly, we were just informed today about cleaning of the TAMPING SCREEN. This information does not appear in any of the documentation we have, but the Capresso representative said that it should be cleaned on a weekly basis to prevent clogging. Unfortunately, once the grinding mechanism is stuck the tamping screen is inaccessable. So now we are faced with another $235 repair OR replacement of our 4 year old machine. She also recommended air drying our coffee beans in a bowl before putting them in the machine. We use beans from a local roaster, so they probably have more oil than the grocery store variety. Hope this helps someone.




  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Thanks "bergend" this worked. I was amazed, I removed used grounds as much as I could and then my husband rapped on the right side of the machine and a round cake of used grounds fell out and thats what was causing it to lock up. I really thought I would have to send this back to Jura Capresso and spend a fortune. You saved the day!!!

Posted on Feb 07, 2010


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can't connect to netflix.

hi richard.
this is all i could find out for you.
Netflix Error NW-4-8. If you experience the error code NW-4-8, it's typically caused by information stored on your device that needs to be refreshed, or a network connectivity issue. Follow the troubleshooting steps for your device below to resolve the issue.

Netflix Error NW-4-8
if you want to read up some more on this go to this link.
couldn connect to netflix code nw 4 8 Google Search

Nov 19, 2017 | Audio Players & Recorders

1 Answer

Scooter is saying error code 8 which is motor does anyone know what this could be please?

Pride Mobility Products Victory 9 Scooter 4 Wheel Error code > ... > Pride Mobility Products Victory 9 Scooter 4 Wheel
Pride Mobility Products Victory 9 Scooter 4 Wheel, error code related issues. ... Question about Thermometer Mobility Scooters ... error code is 8 Error code 8 means an internal controller error or problem and requires replacement of the controller. ... Theysay there is no listing for code 9 I have replaced the batteries,checked .
Basic Troubleshooting Instructions - Pride Mobility > Resource CenterPride MobilityScooters. INFINFB2040 Sonic Troubleshooting ... Chargers. INFINFB2586 Charger Indicator Codes ... Disclosure Statement Pursuant to Cal. Civ. Code 1714.43(a)[PDF]Legend Owner's Manual - Pride Mobility Products

Nov 28, 2015 | Pride Health & Beauty

1 Answer

Error code "8." What does this mean?

Check here:
Looks like your thermistor shorted, you need a repairman.

Mar 10, 2015 | Cars & Trucks

1 Answer

How do I remove error code ce60?

Error ce60 e-Studio 2820c - Fixya
Mar 19, 2013 - So I put in the code 8 clear/stop so it will show the error code. No error code is popping up. The number 8 just stays on the screen, like nothing ...

Jan 27, 2015 | Toshiba E Studio 2330c 2500c 2820c Copier...

1 Answer

Error code 4010 on zebra series 8 card printer

I have Error code 4010 no zebra series 8 card printer. How do I correct it after replacing transfer film?

Oct 31, 2013 | Zebra ZXP Series 8 Thermal Card Printer

1 Answer

Error code 8

Good Afternoon Glenda, thank you for your inquiry!

Is it possible that the error code is missing characters? According to my research 8 is not a valid error code. The number 8 is more like a temperature setting, however to be certain, let's try resetting the appliance. It is important to wait roughly ten minutes and then turn the unit on. Set the correct temperature and please allow 24 hours for the temperature to stabilize. The error code should clear and the unit resume to normal operations. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if the unit's status has changed successfully.

Best regards!

Sep 10, 2013 | Frigidaire Freezers

1 Answer

My washing machine is saying f-8 what does that mine


The F-8 is an error code indicates that the water temperature sensor reading is out of range (below 23 degrees F or above 217 degrees F)

The F-8 error code is an indication of a water temperature sensor error. There is a chance that there is a loose wire connection on the water temperature

Thank you and thanks for using fixya.

Jun 03, 2010 | Washing Machines

Not finding what you are looking for?
Jura Capresso Impressa E8 Espresso/Coffee Maker Logo

2,571 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

The Knight
The Knight

Level 3 Expert

76390 Answers


Level 1 Expert

41 Answers


Level 3 Expert

8597 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides