Error 0xd06202330 reset power

hi friend,
Check Printers head carriage. May be flat 20 pin Cable is faulty or Change Head Carriage assemble. ( Cartridge holder assy.)
good luck

i don't know,give me a solution,i asking to you please answer my asking

Try to reset the printer:

Unplug the printer from power

Hold the # and 9 together while plugging it back

If still not working try again with a # and 3 combination

Try to reset the printer:

Unplug the printer from power

Hold the # and 9 together while plugging it back

If still not working try again with a # and 3 combination

try replace the color one (hp 22)
get a new or refill an old one like this method

if i help you pls vote

Some HP machines have 3 reset levels.

I do not know if the 5610 had them but it's worth a try.

Power off printer, then press and hold buttons while powering on, if it doesnn't reset, then unplug it and press and hold buttons while plugging it in, please tell us if the machine even tries to reset.

# and 3 Partial Reset

# and 6 Semi-Full Reset

# and 9 Full Reset

A Full Reset will clear any stored information in the printer, speed dials, etc, so always start with a partial reset and work your way up.

Hi There
Reset the product:
1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the 'Insert Cartridges ' message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Reset the HP All-in-OneFollow the steps below to reset the all-in-one.

1. Turn off the HP All-in-One by pressing the On button.
2. Unplug the power cord from the back of the HP All-in-One.
3. Plug the power cord back into the HP All-in-One.
4. Turn on the HP All-in-One by pressing the On button.

hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....


http://www.hp.com/printer/prob676ijt65/solution

djiu9ofdfd16

Unplug the power cord from the All-In-One as well as the power outlet.
Plug the power cord directly to a wall outlet without surg protector. (if possible connect it to a different power outlet)
Before connecting the power cord to the All-In-One press and hold the # and no 6 button and then insert the power cord, do not release the keys until you see a message a reset (if the screen goes blank then release the keys and turn the power on)
Then check and see

Good Luck