Question about Singer 7442 Mechanical Sewing Machine

2 Answers

Sewing machine is Stop with a Beep Sound

When i start the sewing it is giving beep sound and stop the machine immediately.

Posted by meena1981 on

  • meena1981 Dec 04, 2007

    Banar



    When i start the sewing it is giving beep sound and stop sewing the machine not the power suppy.



    Meena

  • Anonymous Mar 23, 2014

    It will not keep sewing, it starts and stops.

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

When you say stop does it stop the power supply or the functionality of the machine?

Posted on Nov 30, 2007

  • Sally Whittington
    Sally Whittington Mar 18, 2014

    the functionality, it reminds me of a rubbernband over twisted

×

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

Your problem is most certainly with the buttonhole switch. Firstly: Look if the buttonhole lever, left back of machine, is push up in position. The beeping sound is a warning message. Secondly Remove the light cover, left of the machine, loosen back screw and remove left hand screw completely. Check for a small black electric switch, follow the brown and green elecrtic wire, just back of the light. If you push the BH lever up and down the switch finger should also move up and down. If it stays down, the machine will not work and give a beeping sound. If the switch finger is stuck, push it up with the BH in top position. Hope this will help you

Posted on Dec 04, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My EuroPro 9106 only give the beeping alarm when I try to sew. It is cleaned and re threaded. Any idea what could be wrong, machine is ten years old.

The computer will automatically adjust the needle upper position when the machine is switch on,
and automatically adjust the needle lower position when you start sewing. Please note that it is a
normal phenomenon if you hear a sound coming from the machine (machine adjusting sound)
and feel that the sewing is being delayed. It's not dangerous to sew.
- When operating correctly: 1 beep
- When operating incorrectly: 3-short beeps
- When the sewing machine is in trouble and can't sew: 8 seconds short beeps
It means that the thread is twisted or jammed and the hand wheel axle can't move. Please look
through the "Trouble shooting guide" on page 49 to find the solution. After the problem has
been solved, the machine will continue to sew.


Look for thread wrapped up in hand wheel or in hook/race. See following link for machine instructions.

https://www.manualslib.com/download/451800/Euro-Pro-9105.html

0helpful
2answers

Janome dks 100 se - it keeps beeping when I press the foot pedal and I have to do this several times before it starts sewing. It doesn't beep when using the stop/start button and is sewing fine

Same machine and model and same problem. It’s really irritating. It’s not the bobbin as the screen flashes worth the foot pedal. I’ll look at the tension but given how often it beeps and on so many different projects with different thread and tension it seems to be a fault of some kind... searching for a fix...
0helpful
1answer

I get an E2 error on my Brother CP7500 and the button lever is all the way up

A stitch other than the buttonhole or bar tack stitch was selected and the foot controller was pressed (or the start/stop button was pressed if the foot controller is not connected) while the buttonhole lever is lowered.

Raise the buttonhole lever before continuing the operation.
Each time a key pressed or an incorrect operation is performed, a beep is sounded.
  • For a correct operation
    One beep is sounded.
  • If an incorrect operation is performed
    Two or four beeps are sounded.
  • If the machine locks up, for example, because the thread is tangled
    The sewing machine continues to beep for four seconds.
    The machine automatically stops.
    Be sure to check for the cause of the error, and correct it before continuing to sew.
reference: http://support.brother.com/g/b/faqend.aspx?c=us_ot&lang=en&prod=hf_es2000teus&faqid=faqh00000059_000

user guide:
http://download.brother.com/welcome/doch000470/bc21es20cs60ce50ex66xr6677ug10en.pdf

quick reference guide:
http://download.brother.com/welcome/doch000566/bc21es20ce50qg02enfresdeitnlru.pdf
0helpful
1answer

Singer confience stylist beeps four time and won't let me sew

The beeps usually indicates that your machine is not ready to sew which probably means a function has been left in the activated mode, ie bobbin winder, buttonhole function, etc. . Here are some ideas:

Why does the electronic beeper beep and the sewing machine won sew Sewing...

20 Most Recent Singer 7467S Confidence Stylist Electric Sewing Machine...
0helpful
1answer

E2 error code brother sewing machine

A stitch other than the buttonhole or bar tack stitch was selected and the foot controller was pressed (or the start/stop button was pressed if the foot controller is not connected) while the buttonhole lever is lowered.


Raise the buttonhole lever before continuing the operation.
Note Each time a key pressed or an incorrect operation is performed, a beep is sounded.
  • For a correct operationOne beep is sounded.
  • If an incorrect operation is performedTwo or four beeps are sounded.
  • If the machine locks up, for example, because the thread is tangledThe sewing machine continues to beep for four seconds.
    The machine automatically stops.
    Be sure to check for the cause of the error, and correct it before continuing

1helpful
1answer

Sewing then beeing then jamming up

The Beep is an alarm telling you to stop sewing and find the problem. Since it is jamming in the bobbin area, you should start there. Remove the fabric, then remove the bobbin and bobbin carrier... clean and remove any stray bits of thread from the bobbin area. You also should examine the needle or change it as a matter of course.
0helpful
2answers

Start sewing and starts beep say e2

try rethreading the machine top & bobbin
clean under the needle plate & in the bobbin area for loose threads or lint
try changing the needle
May 20, 2012 • Singer 7422
0helpful
1answer

My machine will start sewing but after about an inch or two of stitches it beeps and stops sewing until I take my foot off the presser foot and start sewing again. Can anyone tell me how to make my machine...

If it is threaded correctly, especially on top, there is a sensor that is giving you the beep error message. Common problem but it requires trip to experienced singer tech. Sorry solution is not for consumer, too hard to get to sensors and it is not an specific action for remedy.
Not finding what you are looking for?
Singer 7442 Mechanical Sewing Machine Logo

Related Topics:

513 views

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Cindy Wells

Level 3 Expert

6394 Answers

Ekse

Level 3 Expert

13435 Answers

Brad Brown

Level 3 Expert

18851 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...