Unlock Says to enter subsidy password tried 1234 000000 last 4 numbers of phone no. none worked

Hi to get subsidy password visit Mobileunlocksolutions.com here they ask you the network name to which your Motorola razr v3xx mobile is locked and the IMEI number of your mobile .Then at last they deliver you code to unlock your mobile.

Try the following :- Enter 9999, and if that doesn't work try 1111 Remove the battery and notethe IMEI number on the label. Replace the battery and enter the last 4 digitsof the IMEI number. If none of these work, thencall your cell phone provider and request an unlock PIN number. You need toprovide information that you are the owner of the cell phone, the cell phonenumber, and your address etc. This may work - Type #lock* then (END) It unlocks your phone, and displaysyour password.

HERE'S THE ANSWER TO YOUR PROBLEM:

1. Enter the last four digits of your phone number on your cell phone PIN screen.

2. Enter 9999, and if that doesn't work try 1111, and if that doesn't work try other four-digit numbers you may have entered.

3. Shut off your cell phone, take off the back of your phone and pull out the battery. Record the IMEI number which is under the battery. Re-insert the battery and power on the phone. Enter the last four digits of the IMEI number on the PIN entry screen.

4. Call your service provider and request the unlock PIN if none of your attempts so far have worked. You will have to prove you are a customer by stating your cell phone number, address and Social Security number.

5. Turn off your phone. Hold the keys "3," "*" and "Call" and switch the phone on. Hold the three buttons down until the word "Formatting..." appears on the screen. This should reset the phone lock code.

6. Go the links in the Resources section and have your IMEI number ready. These websites will ask for your phone model and IMEI number and then charge you a set fee for the unlock code.
Read more: How to Unlock a Cell Phone Password ' eHow.com http://www.ehow.com/how_4810931_unlock-cell-phone-password.html#ixzz1Qc2uBsBY

Tounlock cell phone Password:Instructions
Enter the last four digits of your phone number on yourcell phone PIN screen. Enter 9999, and if that doesn't work try 1111, and ifthat doesn't work try other 4 digit numbers you may have entered. Shut off your cell phone, take off the back of your phoneand pull out the battery. Record the IMEI number which is under the battery.Re-insert the battery and power on the phone. Enter the last 4 digits of theIMEI number on the PIN entry screen. Callyour service provider and request the unlock PIN. You will have to prove youare a customer by stating your cell phone number, addressand social security number. Turn off your phone. Hold thekeys "3," "*" and "Call" and switch the phone on.Hold the three buttons down until the word "Formatting..." appears onthe screen. This should reset the phone lock code. Read more: How to Unlock a Cell Phone Password ' eHow.comhttp://www.ehow.com/how_4810931_unlock-cell-phone-password.html#ixzz19YU6TIa2

Welcome to Fixya

Try this torubleshooting procedure

1. After turning on your mobile phone, press: *#865625#
2. Press Yes to continue.
3. Enter the 16 digit Subsidy Unlock Code
4. Enter the 16 digit Subsidy Unlock Code, again. Device should say: "Network Lock Deactivated" Phone may automatically reboot

*The 16 digit code can be obtained by calling the Mobile Operator Customer Care Department and given the representative the IMEI number. In exchange they will give you the Subsidy Unlock Code. Alternatively, you can go online and seek out a Subsidy Unlock site.
To obtain the IMEI number press *#06# on your mobile device.

Thank you for using Fixya! Enter the 16 digit Subsidy Unlock Code, again. Device should say: "Network Lock Deactivated"
Phone may automatically reboot

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Normal 0

Try the following :-

Enter 9999, and if that doesn't work try 1111

Remove the battery and note the IMEI number on the label. Replace the battery and enter the last 4 digits of the IMEI number.

If none of these work, then call your cell phone provider and request an unlock PIN number. You need to provide information that you are the owner of the cell phone, the cell phone number, and your address etc.

This may work -

Type #lock* then (END) It unlocks your phone, and displays your password.

it should either be the last 4 digits of phone number or 1234 depending on provider. I have also came across it being 0000. try the first options.I hope it will help you.

Step by step instructions:

1.> Get your cell phones IMEI number. Press *#06# ( 5 key press) and you should see this number displayed on your phone. Note down all numbers except the last two. You will need this when you call your providers customer service to ask for subsidy unlock code. You can also get IMEI number by removing the battery cover and battery. You should see the IMEI number written on a sticker. This number is the correct IMEI number and should match the one displayed when you pressed *#06# on your phone except for the last two digit. AGAIN DO NOT GIVE THE LAST TWO DIGIT WHEN ASKING FOR SUBSIDY UNLOCK CODE.

2.> Call you cell phone customer service and give this IMEI number. Ask them to give you SUBSIDY UNLOCK code. Subsidy unlock code is 16 digit long number.

3.> Once you have unlock code, press <**< ( < is left navigation key) key combination ( 4 key press). Select Network to unlock network and enter the subsidy unlock code. Press OK. You will see Network unlocked message displayed. Inputting incorrect unlock more than 3 times will permanently lock your phone to your provider. So beware when you enter the numbers.

You now have a Sony W580i phone that is unlocked and can be used with any GSM based mobile providers.

Good luck. Hope it helps.

usualy the unlock code is a default like 0000 or 9999 or 1234 or the last 4 numbers of the social security # of the previous/current signer of the account. the 6 digit security code is usualy the birthdate of the signer on the account. if none of those work call the phone company and give them your info and they will reset the code to a default.