Question about Hitachi 53UWX10B 53" Rear Projection Television
I have a 5 year old rear projection Hitachi and recently I have noticed a green area that appears in the middle of the lower part of the screen. It is not always there, but it comes and goes more often. Any suggestions?
Some Hitachis have developed bad connections on the convergence output IC's (locations IK04 and IK05) You could try and resolder the IC's but if you are in it that far you are best to replace both. The generic part number is STK392-110
Posted on Nov 30, 2007
The problem is called green geometry.There is nothing wrong w/the green pix tube.It is critical to get the green geometry
accurate because the red and blue convergence overlays on
the green.If you have more than an alignment issue,that will need
repair before adjustments are attempted.
52 views
Usually answered in minutes!
×