Question about GE RM24948 Remote Control

1 Answer

Code and directions

I have a orion tv and I have lost the code sheet and directions for it. went to the store where i got it and they do not have anymore. could you please help me

Posted by mainealf8562 on

Ad

1 Answer

Anonymous

I just wana now where can i find the codes list, i have a sony tv and i cant set up the remote can you help me ?

Posted on Jul 22, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Orion tv codes

Hello

Try with these codes
Four digit universal codes for Orion are

0121 0135 0035

Three digit universal codes for Orion are
035/ 121/ 135

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
4helpful
1answer

I have a GE universal remote and need the four digit codes.

Your Orion TV code is 0121,or 0135,or 0035. Your Orion code for DVD is 0394. Your Orion code for VCR is, 0256,or 0310. hope this was helpful
4helpful
2answers

SILVER RC24922-C LOST CODES FOR TV AND DVD

Most universal remotes will drop the code memory if the batteries have been out for more than 1 minute - you will need your instruction sheet to reprogram, this will have the codes too.
If you have lost the sheet then google the remote model number
0helpful
1answer

Lost manual, need set-up codes for an orion t.v. also need set up knowledge

Direct TV Orion codes (older tv codes are at beginning):
10236, 10463, 10179
Hope this helps somebody!
1helpful
1answer

Code for rca remote for operation of orion tv

I have an Older Orion TV and have tried all different kinds of remotes. The thing is that Orion does not sell their codes to universal remote vendors. I have the best luck out of Philips remotes.
0helpful
2answers

Need code for Orion tv

Here is the codes. Orion 096, 130, 146

Here is the manual.

http://www.brookstone.com/bs_assets/files/pdf/product/manual/538744.pdf

Good Luck and Please Rate Fixya!
1helpful
2answers

I need a remote code for a hitachi tv

Here is the setup copde page http://universal.dev.efocus.nl/?pag=54. I didn't see that model remote listed but many times the remote manufacturer will use the same codes.... So look at other remote codes for Hitachi and see which one works.

MM85
42helpful
9answers

Orion tv codes

try these codes for the orion tv:0121,0135 or 0035. good luck
1helpful
2answers

Orion tv model 1934 only 3, 4 and aux no pic or sound!!!!!!!!!!!!!

Turn the set on, hook the cable directly to the TV, take the remote control and press 1 - 1 and if the TV tunes in channel 11 then your set is fine. If the TV was autoprogrammed when hooked to a cable box then the only channels that will be stored in memory are 3, maybe 4 and AUX. To correct this simply go back into the menu and look for the "autoprogram" option and perform the autoprogram while the cable is directly connected to the TV, without a cable box.
Not finding what you are looking for?
GE RM24948 Remote Control Logo

Related Topics:

82 views

Ask a Question

Usually answered in minutes!

Top GE Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Cindy Wells

Level 3 Expert

6394 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Are you a GE Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...