Garage Heater I have a r30 kerosene reddy heater for my garage. I'm not getting fuel to the plug. The pump seems pretty simple but I guess it's not simple enough for me to fix. I have not replaced the black disk with the flyouts on it?

geno61 Jan 15, 2009

I need to replace the black disk with the flyoots foe a daton3e219b kerosene garage heater

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.
Master
625 Answers

The kerosine heater uses a spark plug for ignition and a photocell to detect flame. at the back end of the blower motor is an air compressor. it is a vane and diaphragm compressor that supposed to put out 3.6 psi of air to the fuel nozzle. the fuel nozzle is a venturi type that creates a vacuum across the orifice to suck fuel from the tank. try this site for spare parts www dot desatech dot com. its the same place I get parts for repairing heaters.
Garage Heater - 6f1013e.jpg

Posted on Nov 30, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Open Questions:

0answers

My carver 5500 ignition seems to have failed is there a battery in the module bottom right of the unit if there is how do I get at it thanks in anticipation. Cheers Bob Pet

Read full answer

Be the first to answer Dec 04, 2018 • All-Pro Kerosene Garage Shop Heaters - All...

0answers

I have a 200T Pro Series Salamander. When it starts, it acts like it's not getting enough kerosene. Then it shuts off w/smoke coming out. When I try to restart it, it does the same thing. It worked really good for the last two weeks.

Read full answer

Be the first to answer May 06, 2017 • All-Pro Kerosene Garage Shop Heaters - All...

0answers

Jd space heater a150 wont ignite Was working now it isnt

Read full answer

Be the first to answer Dec 23, 2016 • All-Pro Kerosene Garage Shop Heaters - All...

0answers

need to fit vulcan burwood fan into position ? how do the springs support fan and how to install

Read full answer

Be the first to answer Nov 13, 2016 • All-Pro Kerosene Garage Shop Heaters - All...

See all All-Pro Kerosene Garage Shop Heaters - All Pro Questions

472 views

Ask a Question

Usually answered in minutes!

Top All-Pro Heating & Cooling Experts

Paul Carew

Level 3 Expert

3746 Answers

Marvin

Level 3 Expert

85241 Answers

Colin Stickland

Level 3 Expert

22509 Answers

Are you an All-Pro Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for All-Pro Kerosene Garage Shop Heaters - All Pro PK115T Forced Air Kerosene Space Heater? Or just drag it here!

Related Topics:

Garage Heater I have a r30 kerosene reddy heater for my garage. I'm not getting fuel to the plug. The pump seems pretty simple but I guess it's not simple enough for me to fix. I have not replaced the black disk with the flyouts on it?

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

No kerosene to orfice

When I plug in kerosene reddy heater, it only blows smoke out the front, wont ignite. please help! I need heater to heat garage, cant afford an estimate and then a repair, hope I can replace a part...

Dynaglo forced air kerosene heater fuel not getting to nozzle. replaced hoses, cleaned nozzle, cleaned fuel filter, pressure gauge reads OK.

I bought a used all pro 200 and can't get it to start. The lighting element heats up and the fan starts but there isn't any fuel coming out . I took the filter off and it is clean but there seems to be...

My Master 110,000 btu heater won't start after plugging it in. The tank is full of fuel. Any recommendations .

On the ignitors for these heater are the terminals bridged? My heater fogs the fuel but doesn't light. I have installed a new ignitor and ensured that the fuel filter is not clogged and has new clean...

I dont get not kerosene when i turn it on.

Not startig or getting fuel

The heater has been setting for a long time with fuel in it. It will not light. Is there away to check and see if injection port is plugged?

When we attempt to start our All Pro Multi Fuel Kersone Forced Air Heater the igniter get red hot, fan turns on but only stays on for less than a minute and then shuts down. All lines are open but no fuel...

Not finding what you are looking for?

Kerosene Garage Shop Heaters - All Pro PK115T Forced Air Kerosene Space Heater

No kerosene to orfice

Open Questions:

My carver 5500 ignition seems to have failed is there a battery in the module bottom right of the unit if there is how do I get at it thanks in anticipation. Cheers Bob Pet

I have a 200T Pro Series Salamander. When it starts, it acts like it's not getting enough kerosene. Then it shuts off w/smoke coming out. When I try to restart it, it does the same thing. It worked really good for the last two weeks.

Jd space heater a150 wont ignite Was working now it isnt

need to fit vulcan burwood fan into position ? how do the springs support fan and how to install

Ask a Question

Top All-Pro Heating & Cooling Experts

Paul Carew

Marvin

Colin Stickland

Are you an All-Pro Heating and Cooling Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Garage Heater I have a r30 kerosene reddy heater for my garage. I'm not getting fuel to the plug. The pump seems pretty simple but I guess it's not simple enough for me to fix. I have not replaced the black disk with the flyouts on it?

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

No kerosene to orfice

When I plug in kerosene reddy heater, it only blows smoke out the front, wont ignite. please help! I need heater to heat garage, cant afford an estimate and then a repair, hope I can replace a part...

Dynaglo forced air kerosene heater fuel not getting to nozzle. replaced hoses, cleaned nozzle, cleaned fuel filter, pressure gauge reads OK.

I bought a used all pro 200 and can't get it to start. The lighting element heats up and the fan starts but there isn't any fuel coming out . I took the filter off and it is clean but there seems to be...

My Master 110,000 btu heater won't start after plugging it in. The tank is full of fuel. Any recommendations .

On the ignitors for these heater are the terminals bridged? My heater fogs the fuel but doesn't light. I have installed a new ignitor and ensured that the fuel filter is not clogged and has new clean...

I dont get not kerosene when i turn it on.

Not startig or getting fuel

The heater has been setting for a long time with fuel in it. It will not light. Is there away to check and see if injection port is plugged?

When we attempt to start our All Pro Multi Fuel Kersone Forced Air Heater the igniter get red hot, fan turns on but only stays on for less than a minute and then shuts down. All lines are open but no fuel...

Not finding what you are looking for?

Kerosene Garage Shop Heaters - All Pro PK115T Forced Air Kerosene Space Heater

No kerosene to orfice

Open Questions:

My carver 5500 ignition seems to have failed is there a battery in the module bottom right of the unit if there is how do I get at it thanks in anticipation. Cheers Bob Pet

I have a 200T Pro Series Salamander. When it starts, it acts like it's not getting enough kerosene. Then it shuts off w/smoke coming out. When I try to restart it, it does the same thing. It worked really good for the last two weeks.

Jd space heater a150 wont ignite Was working now it isnt

need to fit vulcan burwood fan into position ? how do the springs support fan and how to install

Related Topics

Ask a Question

Popular Questions

Heater won't stay lit without holding the button

Propane heater burning eyes

All pro heater turns on but won't light and shuts

Torpedo heater runs for a minute or two then the breaker trips.

Raw propane fumes and burning eyes

Top All-Pro Heating & Cooling Experts

Paul Carew

Marvin

Colin Stickland

Are you an All-Pro Heating and Cooling Expert? Answer questions, earn points and help others

Manuals & User Guides