13 inch rca true flat tv

Sound like your Y-Sustain board has one foot in the grave. The Y upper buffer and Y lower buffer boards go when the Y Sus Goes too...

When CRT TV's show only a white/bright line horizonatlly It is a failure of the flyback Transformer. Not all that costly to repair. Your old TV will probably still be working when all the latest plasmas and rear projections have been laid to rest. Fancy junk TV's dont get any better programs than those old reliable ones

Please rate my help++++Thanks for using FRIXYA

The vertical deflection has gone out. Put it in the shop.

as of june 2009 there are no longer any anolog channels only digital

You have a defective light engine. Contact RCA support. Sometimes they will warranty these even after the 1yr warranty has expired.

IT SOUNDS LIKE DRY JOINTS ON FRAME CHIP

Same problem with my 28 inch 16:9 CRT Sanyo. I usually fix it by cutting the power to the outlet and then it works fine. Had it into the repair shop - and of course it never acts up there...

tv worked great, turned it off one day and back on the next and the on light would not come on nor would the tv work, rear projection 52 inch rca

mine does the same thing

Check the signal type. It may be set incorrectly. Change the channel. You may be on a blank channel. Check to see if the TV is tuned to channel 3 or 4 if you are watching a videotape. Check the TV/VCR button on the VCR is in the correct mode by pressing the TV/VCR button on your VCR.