Question about Fujitsu Heating & Cooling

Ad

SOURCE: york model number ( H2DB024806A

unit is 2 ton totla capacity 2 tons when mathced with proper equipment. BTU 24,000. Sensible heat only dervied from enthalpy chart once unit is installed. You will need a nate certified technician to assit you with the sensible and latent heat calculations for unit.

Posted on May 02, 2011

Ad

call fujitsu engineering division direct and ask them about what is connected and if it works ok

logically as each evaporator has it's own tx valve as long as the compressor is large enough to run all together it should work but get the right information from the fujitsu experts

logically as each evaporator has it's own tx valve as long as the compressor is large enough to run all together it should work but get the right information from the fujitsu experts

Oct 11, 2016 | Fujitsu Heating & Cooling

not sure what you want so i will give a general answer.

tonnage is equal to BTU ...

so it you have a....

12000 BTU that's a 1 ton AC

24000 BTU that's a 2 ton AC

36000 BTU that's a 3 ton AC

and so on and so on just look on the tag for the BTU's

tonnage is equal to BTU ...

so it you have a....

12000 BTU that's a 1 ton AC

24000 BTU that's a 2 ton AC

36000 BTU that's a 3 ton AC

and so on and so on just look on the tag for the BTU's

Feb 01, 2016 | Heating & Cooling

Tonnage is not used much as a rating anymore. That model is a 3 ton. The rating used now is either BTU or SEER.

Jan 10, 2016 | Carrier Heating & Cooling

Most likely low on refrigerant. This will cause the evaporator to ice up which will then drip in side the room as the outer surface melts. It also causes less air flow through the heat exchanger which exacerbates the problem. You need to find the source of the leak which is probably at one of the flare joins. Unfortunately, I don't have a service manual for this model so cant tell you what the error code is. Consult a local tech.

Jul 14, 2014 | Fujitsu 24C1 Air Conditioner

The 48 before the VKD in the model number stands for 48000, BTU. For refrigeration, 1 Ton = 12000 BTU. Therefore 48000 BTU / 12000 (1 Ton) = 4 Tons

May 03, 2013 | Heating & Cooling

Hello, the tonnage on this unit is a 3 ton unit. Your model number tells you. The 036 is the tonnage. There are 12,000 btu's per ton, so 36 divided by 3 =12 or in this case 12,000 btu's.

Sincerely,

Shastalaker7

A/C, & Heating Contractor

Sincerely,

Shastalaker7

A/C, & Heating Contractor

Jun 05, 2011 | Intertherm P3RC-036K Air Conditioner

This is a 3 and 1/2 ton unit.

The 042 in the model number is the tonnage of your carrier unit.

AC tonnage is based on 12,000 btu per ton.

12,000.....1 ton

18,000.....1 and 1/2 ton

24,000.....2 ton

30,000.....2 and 1/2 ton

36,000.....3 ton

42,000.....3 and 1/2 ton

48,000.....4 ton

60,000.....5 ton.

There is no 4 and 1/2 ton unit.

The 042 in the model number is the tonnage of your carrier unit.

AC tonnage is based on 12,000 btu per ton.

12,000.....1 ton

18,000.....1 and 1/2 ton

24,000.....2 ton

30,000.....2 and 1/2 ton

36,000.....3 ton

42,000.....3 and 1/2 ton

48,000.....4 ton

60,000.....5 ton.

There is no 4 and 1/2 ton unit.

Apr 09, 2011 | Heating & Cooling

The Tonnage appears to be 2 1/2 ton,

024=24,000 BTU=2ton

030=30,000 BTU=2 1/2ton

036=36,000 BTU= 3ton

I dont think you have the correct Model Number, Look

on the outdoor unit, the model number might start with a 38. Hint Carrier and Bryant Products are the Same, just different nametag

024=24,000 BTU=2ton

030=30,000 BTU=2 1/2ton

036=36,000 BTU= 3ton

I dont think you have the correct Model Number, Look

on the outdoor unit, the model number might start with a 38. Hint Carrier and Bryant Products are the Same, just different nametag

Feb 17, 2010 | Heating & Cooling

In almost every case, most manufacturers put the tonnage in the model number. Look for something that is divisible by either 6 or 12. Something like, 24, 30, 36, and so on. Cfm has to match the tonnage. Usually in the neighborhood of 450 cfm per 12,000 btu's of cooling for the inside of the structure.

Hope this helps.

Hope this helps.

May 08, 2009 | Heating & Cooling

That air handler can accamodate different size coils. Look for the coil model number. Also you can look at the outdoor unit model number they should be matched up. There is generally a set of 2-3 numbers in the model numbers that will tell you. xxx036xxx is 36,000 btu. tonnage is 12,000 btu per ton so 36,000 btu's would be 3 tons. xxx040xxx= 40,000btu's or 3.5 tons etc.

Mar 16, 2009 | Heating & Cooling

Aug 22, 2019 | Fujitsu Heating & Cooling

37 views

Usually answered in minutes!

×