RTO Paslode #650027 2500CT Placement Nail Logo
Posted on Aug 11, 2009
Answered

Paslode air framer not sinking some nails

My Paslode air framing nail gun every 6 /9 nail will leave the nail up about 3/4 inch. What could be wrong?

Answer This Question

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Corporal:

An expert that has over 10 points.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 9 Answers
  • Posted on Dec 22, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Corporal:

An expert that has over 10 points.
Problem Solver:

An expert who has answered 5 questions.

Joined: Dec 21, 2010
Answers
9
Questions
1
Helped
3481
Points
10

If you're rapid-firing, this will happen. You need to let the air chamber fully refill before shooting again.If your gun says "maximum 120 psi" then set your air at 120#. If you have a slow compressor, get one made for the job, or be satisfied with carrying a hammer. You need quicker recovery, or your gun needs servicing/cleaning by a Paslode mechanic.

Anonymous

Level 1:

An expert who has achieved level 1.
MVP:

An expert that got 5 achievements.
New Friend:

An expert that has 1 follower.
Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 24 Answers
  • Posted on Jan 15, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
MVP:

An expert that got 5 achievements.
New Friend:

An expert that has 1 follower.
Hot-Shot:

An expert who has answered 20 questions.

Joined: Nov 06, 2009
Answers
24
Questions
0
Helped
14063
Points
23

Your air pressure is dropping everytime you fire. It sound like your compressor is not cutting back in untill it to low. Not giving your tool enough continuess pressure. Your compressor cut in pressure should be around 90-100psi no less. and your max. pressure no more then 120psi. (Make sure your regulator is set at 110psi)
good luck...!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why is my gun bending nails?
Adjust the Work Contacting Element. See page 4 in the manual...
http://www.paslode.com/owners-manuals.html

Adjust the depth of drive.

Make sure correct fasteners are being used.
Use fasteners that meet Paslode specifications only.

Increase air flow to tool -- use larger air lines
(3/8 ID minimum).

Increase Air Pressure. DO NOT EXCEED 120 PSI.
Read full answer
Jul 23, 2014 • Paslode F350S PowerMaster Plus 30-Degree...
0helpful
1answer

Just cleaned gun, shot about 300 nails, and wont shoot nails anymore, all within 2hrs.
wow 300 nails in an hour for this gun is alot. I am a professional framer and would not recomend this gun for that kind of use. The only time I use the pasload is when I have a small punch list. Not sure how old your gun is or how long you have been using it under that much of a load, but my guess is you may have burnt it up. The only real answer for these guns is to take them to a qulified repair person.
Read full answer
Mar 03, 2010 • RTO PasLode 900420 Impulse Framing Nailer
7helpful
1answer

Paslode nail guns won't shoot
piston is probably jammed

This happens sometimes try holding it up against a board with the trigger depressed and then inset the battery.

The goal is to try to force the firing sequence to get the piston back to the right position with corded units this is simply done by attaching the air hose with the trigger pulled this causes air to rush into the gun chamber pushing the piston back and firing a nail out.

The cause of this is a misfire or jammed nail that stopped the piston in the wrong location so air will not build in the chamber correctly.

Hope that helps
Read full answer
Feb 18, 2010 • RTO Paslode 902000 IM250 Ii Cordless 16...
0helpful
1answer

I have a paslode nail framer 900600. the problem i have is the same after 3 exchanges. The gun will stop firing. i have oiled it, replaced gas,etc. the hammer simply will not come down to force the nail...
It may be as simple as making sure the spark plug lead is in the spark unit all the way.( Black box in the handle). Good Luck!! If you get stuck call Adelaide Nail Gun Repairs. They may be able to help you over the phone.
Read full answer
Oct 11, 2009 • RTO Paslode 902000 IM250 Ii Cordless 16...
0helpful
1answer

I have a Senco Framepro 701xp. I'm using a 3
What air pressure are you using? Try uping that, past 90 to about 105-110 max. What size air hose are you using? 1/4" is to small, need at least 3/8".
Read full answer
Sep 20, 2009 • Senco 2H0033N Framepro 701XP Clipped Head...
0helpful
1answer

Nail comes out another hole
are you using the right nails and are they inserted properly if this is an angle gun? Also look for a jammed nail that might be causing this. look at the magazine bolts to make sure they are tight. You can go to Paslode.com for the owners manual and troubleshooting guide.
Read full answer
Sep 10, 2009 • RTO PasLode 900420 Impulse Framing Nailer
1helpful
1answer

Paslode cordless nail gun which way does the
chamfer side goes towards the nails/magazine
Read full answer
Jun 30, 2009 • RTO PasLode 900420 Impulse Framing Nailer
3helpful
2answers

Will bosch nail guns operate with Paslode brand nails?
The F28WW takes 28Deg nails that are collated with wire, so your nails won't work in that gun. The N80SB is also a 28Deg nailer so your 30 Deg nails won't work in that gun either. Sorry about the bad news but it looks like your going to have to spring for new nails
Read full answer
Jun 11, 2009 • Stanley Bostitch N80CB Coil Framing Nailer
1helpful
1answer

Firing pin not retracting far enough to allow nails forward
Yes,this is a common "mis fire" by Pasilode. I own the 16p Framer and the Angle nailer and I never get it from the Framer but I do get it seldom from Trim Gun,nothing you can do ,its just a misfire.

Please rate jj505
Read full answer
Mar 20, 2009 • RTO Paslode 902000 IM250 Ii Cordless 16...
0helpful
1answer

Nail size
Hi, No you can't, it is generally a metal framer and the nail size is up to 2 1/2 x .131 , .148, or .162. Hope this Fixsya!
Read full answer
Feb 24, 2009 • Tools & Hardware - Others
Not finding what you are looking for?

View Most Popular

Paslode #650027 2500CT Placement Nail

  • Tools & Hardware - Others

Related Question

Why is my gun bending nails?

  • Paslode F350S PowerMaster Plus 30-Degree Framing Nailer F350S

Related Topics

435 views

Ask a Question

Usually answered in minutes!

Popular Questions

How to fix firing pin from sticking after each shot?

RTO Paslode 902000 IM250 Ii Cordless...

Paslode nail guns won't shoot

RTO Paslode 902000 IM250 Ii Cordless...

My paslode angled finishing gun keeps jamming

RTO Paslode 902000 IM250 Ii Cordless...

Paslode im250 type 2 wont fire

RTO Paslode 902000 IM250 Ii Cordless...

My IM65 light flashes green then red, fan seems to

RTO Paslode 902000 IM250 Ii Cordless...

Top RTO Tools & Hardware - Others Experts

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66855 Answers

Are you a RTO Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...