I have a locked up breadpan. Need another

If the finish is worn and damaged and rust is impeding turning of the spindle you may wish to consider replacing your breadpan.

try contacting the Toastmaster parts supplier to see if they have a breadpan for your model. You can make a web inquiry here:

http://www.partsourceplus.com/contact_us.php

The comnpany does have parts for many other models so there is some chance they may be able to provide a compatible breadpan. For reference:

http://www.partsourceplus.com/toastmaster-parts-accessories-bread-makers-c-51_1268_1277.html

Hi and welcome to FixYa. I am Kelly.

This is one of the few sources that I know of for Toastmaster breadpans and the only source for Toastmaster parts that I am aware of:
http://www.breadmakerparts.biz/category/1198/catId=3449212

Here are his NEW breadpans:
http://www.breadmakerparts.biz/item/1198/1198-pan-w-handle/lid=5937619

You can contact him here:
http://www.breadmakerparts.biz/contact

Thanks for choosing FixYa,
Kelly

You would be better off just replacing the pan. If you need an online source just email me

Hi, There is a sealed bearing in the base of the bread pan. When this sealed bearing fails the paddle gets stuck and will not turn. Take the pan out of the machine and see if you can turn the paddle by hand. If it doesn't turn freely, then it's probably the sealed bearing that is is failing. If it turns freely, then this is good news. Keep the pan out of the machine and go to a kneading cycle. Look through the lid window to see if the motor shaft is turning. If it is not turning, then a belt fell off , needs to be tightened, or has broken. Motor, belts and pulleys are in the base of the machine. Remember to unplug machine before working inside the machine. Finally, make sure the pan is seated in the machine correctly. Good luck Hankl

Hi,
Unless you are lucky to find one at a tag sale or something, I would go new. I looked everywhere for a replacement and they were expensive. Bought a new one at Wally Mart in NH for $53.00.

Try this site. It may help you
Pls rate the answer
Kurt
http://www.breadmachinedigest.com/beginners/manufacturers-parts.php

seems like we all have the same fault with this breadmaker - and we all cant find the solution easily - looks like breville really dont have much of a customer care section do they - i suppose they think you should just go out and buy a new one -i am still hunting for a new pan and paddle - looks like they're as scarce as rocking horse **** !!

I found the part at
Parts & Accessories: 
Phone: 1-800-738-0245 (Monday–Friday, 8:30 a.m. to 8:00 p.m., ET) 
http://www.saltoninc.com/

Put your breadman on a surface low enough that you can look straight down on the pan and the machine.

On each side (L/R) there are thin aluminum "wings" that hold the pan in. The pan should be placed straight down and pulled straight up.

Adjust if you can-do remember that there is a "peg" in the center of the machine, so don't break it.

I had to fuss a little to get it straight and then lift it out.