I'm told my sony KP 48565 has a convergence problem. I have 3d type images and blue/red colours. Is there are way I can adjust this? The repair shop told me I had to take it in to repair. The t.v is in my attic and very heavy to take down 3 flights of stairs (I would also have to remove the railing). Is it worth repairing , I purcahased it in 2000 and expected more than 7 years use out of it.This is a rear projection t.v.
Most of the time the convergence ic's can be replaced in the home.they are usually the 2 large ic's on the left side board mounted to a large heat sink..the ic's will cost between 25 an 50 dollars each.. the job requires soldering skills so you might want to call around to find a tech to come and replace the..also are you sure you don't have a kp 48V65?
Posted on Nov 29, 2007
http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull
Solution #1169 views
Usually answered in minutes!
×