Question about ATI RADEON 9800 PRO (256 MB) Graphic Card
The device is ATI Radeon X1050 and not the product chosen at the product category (mine wasnt there... :-( )
I'm trying to use dual screen with windows 2003.
I've installed the installation CD's driver (no problem there)
than did a reboot, and hooked 2 screens to the ati card (pci express slot).
the bios is configured to start booting from PCIEX. and indeed the initial load of the windows is being done from the digital exit of the card. at some point the entire visual disappears, and only by pluging one of the screens to the old onboard exit, i can see that the machine continues to load windows...
thanks!
Erm what u need to do is get 2 graphics cards and maybe another stu=ick of ram to take the ompatability of the graphics card to then use duel screen
Posted on Apr 02, 2008
ATI can get confusing. You might have installed ATI's CCC, "Catalyst Control Center", along with the display drivers. I suggest you download the latest combo-CCC and drivers for your video card. ATI comes out with new drivers pretty fast. When using dual monitors CCC is where you want to setup your monitors. After you set up the catalyst control center you'll find it much easyer to assign what monitor displays what. One other suggestion. ATI will want you to uninstall any other software for your ATI card even though all you have is ATI software.
Driver site: http://ati.amd.com/support/driver.html
ATI's uninstaller utility: http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=1447
Posted on Dec 04, 2007
949 views
Usually answered in minutes!
yes I DO
I have problem to install ATI RADERON X1050 drivers from CD to my 720p OLEVIA screen. After I installed a drivers from CD, the resolution on my screen not better than ever ( I am using Hp desktop, connect with DVI - HDMI cable). I can't adjust any resolution better than 1360 X 768 !!!!!! What should I do?
×