- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, If faded prints happen
even after replacing the toner cartridge or if your current cartridge has
enough toner, it is most likely be
due to dust at the laser reflecting mirrors inside the printer. I have worked/ serviced similar Laserjet Printer with same issue. Actually,
faded prints are due the the dust/
toner dust accumulated on the optics (mirrors and lenses) inside the
printer, which refect the laser beams to form prints. Hence the image is
not produced properly. This needs professional hands for servicing and cleaning of the optics inside the printer. Rest
assure that the printer requires ONLY CLEANING OF THE MIRRORS, which
are inside the printer. So, it is advised that you get the printer
serviced by any printer repair/ service professional.
(Please note that the mirrors, lenses and scanner assembly inside such
printers is extremely complex and can get damaged very easily
especially the mirrors).
Hope it would help. If you need any clarification, let me know Good Luck! CreativeTECH
The toner cartridge is faulty. It is possible that when you pulled out the strip that the whole thing didn't come out. Return the cartridge (with a couple of printed sheets to demonstrate printing) and the receipt and you should get a replacement.
Have you tried cleaning the leans at the bottom of the printer? Open the cover, pull out the drum. Under it is a long, narrow piece of glass. If it gets dusty or toner accumulates on it, it will cause streaks in the printing. If this is dirty, take a clean, soft cloth and very gently wipe it off.
I have a SCX-4100 Samsung, replaced the tonger cartridge, it was working fine for a few hundred sheets of printing, but after that, the left side of the page was printed very light, faded. If I run the "Clean Drum", it will print a litter better, but still faded. What can I do to correct this problem? Thank you TT