Question about Compaq Presario 5000 PC Desktop

1 Answer

Cursor stuck in middle of screen

When i turned on my compaq presario computer, my cursor was stuck in the middle of the screen and i cannot get it to move at all.

Posted by erryn on

  • AshCurr Dec 03, 2007

    I have a Toshiba laptop and my cursor won't move from the middle of the screen. I am able to get to the start menu and to the control panel but I can't click or move through it to select mouse options. So how do I fix this problem?

×

Ad

1 Answer

Conor Campbell

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 56 Answers

If you are using an external mouse, unplug it and see if it will go with the pad.If it works with the pad then its the exteranal mouse.
If you are using the pad you may have to replace the pad or recalibrate it using the pointer device, you can use the tab key to go through to the start menu then use the arrow keys to go to control panel.
Hope this helps

Posted on Nov 28, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My compaq presario 500 wont boot up?compaq screen comes on then, blank screen,a little cursor in the upper lefthand side

virus is the cause. You are going to have to put in your windows cd and boot from it. Then do a "repair" and hopefully recovery your system if not you are going to have to do a total system wipe.
0helpful
1answer

Compaq Presario MV500

operating system not loading - hard drive may not be working or memory failure. ?
0helpful
1answer

I want to turn off the touchpad

HP and Compaq Presario laptop computers are made by the same company, so the hardware on certain models of each brand might be nearly identical. Many newer laptops, for example, use identical technology to control the touchpad, which in turn controls your mouse cursor. If you want to disable this touchpad use the software already installed on your PC.

Click "Start." Click "Control Panel." Click "Mouse." Click the "Device Settings" tab. Click on the listing for the HP touchpad to highlight it. Click the "Disable" button to disable the HP touchpad on your Compaq Presario laptop computer.
HP compaq service manual
http://www.hp.com/ctg/Manual/c00246219.pdf
1helpful
1answer

I have a presario cq61 and have forgot my password can u help

Try starting the computer in safe mode. Turn on the computer and once the COMPAQ screen clears press F8 a few times - don't hold down the key however. Winodws stops loading at teh Startup Options screen (black, text only). From that menu use the cursor keys and ENTER to select "Safe Mode". Once Windows loads (it may look humungous!), login as the Administrator (which should now be visible). Use this account to reset your forgotten user password. Restart once complete - the computer will automatically start normally.
0helpful
1answer

Compaq Presario V2000 laptop stuck on compaq logo screen

when turning on the system go into the BIOS and reset back the seeting s to factory defaults and reboot the system .. If this fails then reseat the Hard drive may have come loose or ?

did you recently add new software ? drivers ? hardware?
0helpful
1answer

My computer starts up perfectly fine, i click the " start windows normally" button, and it loads. Then after loading the screen turns black ( I can still see the LED light and cursor) PLEASE HELP!

When it ask you how you want to start the computer the select Last known Good Configuration. It should boot up normally.
Then go o the control Panel - System - Hardware - Device Manager and check for any devices that didn't install (the ones with the yellow ?)
You will need to reinstall these drivers.
0helpful
2answers

Www.fixya.com/support/t552805-missing_rtl100_bpl

my compaq presario 5000 desktop will start and get stuck on the compaq logo screen with a cursor in the right hand corner.I try pressing F6 and it won't do anything.I tried other keys and it does nothing.Apparently my granddaughter told me ther was a message came up sayinf computer is locking up.Any help will be appreciated.
Barb
1helpful
1answer

Compaq Presario R3000 Black Screen with flashing cursor

Lines are the BGA RAM Or VRAM Needing rework.. This will also cause boot issues on these models. Do you ever see the Compaq Logo? Weve repaired a ton of these and class settlement happened for the R3000's regarding the jacks but we could repair the other issue as well. (As well as install a new jack while its here).. HP's reimbursing for these outside repairs.
Good luck!
0helpful
1answer

Compaq Presario 5000 start up problem

Follow the instructions: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=96382&prodTypeId=12454&prodSeriesId=96382&objectID=bph07173
Not finding what you are looking for?
Compaq Presario 5000 PC Desktop Logo

367 views

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

588 Answers

Mehandi Husain ...

Level 3 Expert

1516 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...