Everthing was fine until batteries wewnt dead. Put new ones in now it beeps every so often and the buttons dont work. What is wrong?

hold down the "find handset" button til it flashes, and then let go and press it again while it flashes. This will de-register the phone and you should get a new message saying the the handset isn't registered blah blah blah. Then put it back on the base until it beeps. This should fix your problem, unless the base itself is just dead.

check power from battery to solenoid and the main power wire going to the fuse block... a good test light will help... oh, i suggest you unhook those new lights until you get the other issue resolved...

hi i bot robopanda sec hand and he was working fine untill i put new batterys 4 rayovac 4.0 aa batterys it worked just two seconds the everything whent dead and i,m unable to start him agine i even pushes the reset button im so un happy about this please please help me martin.

have ytou tryed different memory cards i put new set in and mine did the same and dont mixem either sam problem try a new cpu it also can be burned out or damaged..

Hi,
Yes you are right, a defective battery.
It's always recommended that you use manufacturers endorsed hardware because of this fact!!
Return the battery and get a new one. when you get the new battery don't charge it, just use it until its dead and then recharge it. It will then hold 100% charge.


Good luck

Operator panel display blank, five beeps, and LED off
Service tip: The printer has detected a problem with the system card, the operator panel assembly cable (part of
the top cover access assembly), or the operator panel assembly if POST does not complete. The printer emits
five beeps, and sticks in a continuous pattern until the printer is turned off.
Is this what you are getting?

Well it sounds like a combo of both. Definitly get the battery replaced again. The phone itself probably needs new software. take it your service provider's corp store to get the software updated.

dont buy this c*#p again thats the best solution i can give

dear samanthaj
My camera did the sae thing until I got duracell recharables. IT WORKS PERFECT NOW,,, as far as the camera staying on. TRY I..they're gREAT

Could be a dodgy power connection this seems to be happening a lot at the momentif you look at other threads here.

Kevan