Question about Konica Minolta Office Equipment & Supplies
SOURCE: Konica Minolta magicolor 2430DL
Open the top cover. Remove the drum (part with long green handle). Below the drum you will see a strip of glass about 4-5 inches long. Take a cloth and wipe across the glass.
This will normally clear up any white lines in your print.
Posted on Jul 19, 2008
Did you buy a whole new drum unit, or just change the cartridge? If so, the fuse may still be blown. Also, you may need to empty the spent toner out of the old cartridge.
Posted on Nov 18, 2008
Unplug from PC, unplug from wall, leave unplugged for say 5 mins, and then plug back into the Wall, then, reboot PC, then plug into PC. Now should be OK. If NOT please use the manual below to troubleshoot whats wrong.
Posted on Apr 28, 2010
Tips for a great answer:
Feb 19, 2017 | Konica Minolta Magicolor 1600W Printer
Aug 21, 2014 | Konica Minolta Magicolor 1600W Laser...
May 15, 2014 | Konica Minolta - Magicolor 1600 1600w...
Apr 15, 2014 | Konica Minolta Magicolor 1600W Printer
Jan 03, 2014 | Konica Minolta Magicolor 1600W Printer
Jan 02, 2014 | Konica Minolta Magicolor 1600W Printer
Jan 22, 2013 | Konica Minolta Magicolor 4690MF...
May 21, 2012 | Konica Minolta Magicolor 1600W Printer
May 15, 2012 | Konica Minolta magicolor 1690MF All-In-One...
Mar 24, 2017 | Konica Minolta Magicolor 1600W Printer
79 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 1 Expert
Level 2 Expert