Kenwood Excelon KAC-X811D blinking e-03

The code E.03 or means that the speaker cable is shorted, or that the speaker cable output is in contact with the vehicle ground. You may need to get a new speaker cable. First check the output for the speaker cable and make sure that it is not touching the ground wire output. If you are sure it is free of contact, the cable is probably shorted.

could be the board could be just some fuses on the amp and in the power wire sometimes it actually blows the computer on your car but rarely.

According to the Manual for the KAC-X811D, E-03 indicates that there is a short curcuit in the speaker wires.

Check that you dont have a short on the wires and also check your speakers.

Try disconnecting the speakers and the wires and then swith it on.

If it comes on without showing the error then connect the wires and speakers 1 at a time

Hi was the fan running fine before overheating problems if so sounds like the fan has gone open amp up take fan out and take to a elec store for replacement

somthing is fried on your motherboard

check your remote connection

god hates you

you probably blew it up. Whenever you smell that smell it is almost always a capacitor in there that blew.

the manual say it means that the speaker cord is shorted, or when the speaker output is in contact with the vehicle ground, i hope you can solve the problem with the info i just gave. good luck

This error msg appears when the speaker cord is shorted When the speaker output is in contact with the vehicle ground