Question about Frigidaire Washing Machines
SOURCE: Frigidaire GLEH1642D
Sure if one of the windings in the motor is bad or on the board. There should be a tech sheet behind the washers bottom access panel that tells you how to test the motor and board.
Posted on Oct 30, 2007
SOURCE: Replace Control Board?
control board sounds like alikly source, been known to have problems with their display boards as well though.does your unit have a display board on the front maybe 2in.x 3in. square inlay? or is ti just kinda all part of the push button leds
Posted on Feb 23, 2008
SOURCE: power door locks and windows
The answer to your question is maybe. Get a couple of switches from a junkyard (my guy gets $5.00 each) and try them. Here's why: I have no less than five different wiring diagrams, and none of them make any sense at all (been doing this stuff a really long time) I keep a good switch handy to check my jeeps when one gets wierd on me...even so, my 93 passenger window works with the key off, none of the others do. Stopped trying to figure it out a long time ago, but would really like to meet the guy who designed this stuff!
Posted on Feb 22, 2009
SOURCE: Wash machine won't spin.
If you want you can jump the switch out by taking the wires off the switch and put electrical tape around them together really tight and see if that works if so its your switch thats bad
Posted on Aug 24, 2009
Hi, if your washer spins but doesn't pump the water out, the drain line is probably clogged. In many washers, a small sock or other piece of clothing can get between the clothes tub and the outer tub that holds the water. If the clothing gets between the tubs, it may then get into the drain hose that's attached to the pump--or even into the pump itself. If it's in the pump, you need to remove the hoses from the pump and pull the item out.
To remove the sock from the outer tub port, open the washer's main access panel and remove the large-diameter rubber hose that connects the pump to the bottom of the outer tub. Then, using needle-nose pliers, try to grab and remove the clothing through the port.
Sometimes you can't remove the stuck clothing from below. Then you have to remove the agitator, top of the outer drum shield, and inner clothes tub. This isn't easy to do--and you may need special tools--so you might be happier getting a qualified appliance repair technician to do the job.
If the drain line isn't plugged, the problem may be with your pump. Even if the pump appears to be turning, the internal impeller may be broken. If so, you need to replace the pump.
Posted on Nov 23, 2010
Tips for a great answer:
Aug 04, 2013 | Frigidaire FFBD2411NS
on Mar 30, 2008 | Kenmore 80412 Microwave Oven
Hello Frank Webb - Does the cord or plug look damaged? If it does not, try resetting the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes. If it proves to be ineffective, I suggest contacting a professional to move forward accurately. The unit may possibly be experiencing an issue with the control board, faulty door lock assembly, faulty pump, or the timer itself is not operating correctly.
Dec 29, 2012 | Frigidaire ATF6000ES Front Load Washer
Hello cbrhonda125 - Try resetting the unit dryer by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes. Restart unit and if it proves to be ineffective, there are multiple possible causes; faulty power cord, house wiring, defective control board, thermal limiter or door switch. This is something that a professional would need to properly diagnose.
Dec 19, 2012 | Frigidaire FEX831CS Top Load Stacked...
Nov 04, 2012 | Frigidaire Electric Dryer
Hello - Try resetting the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and start normal cycle. If this proves to be ineffective, then contact a professional to move forward accurately. Possible causes could be a faulty power cord or house wiring, defective control board, thermal limiter or door switch.
Oct 22, 2012 | Frigidaire FEX831CS Top Load Stacked...
Hello Shawn Leonard - Try resetting the unit at the household circuit breaker first and then retry the unit. If this proves to not be successful, then typically this is something that a professional would need to diagnose. Possible causes could be a faulty power cord or house wiring, defective control board, thermal limiter or door switch.
Oct 03, 2012 | Frigidaire FEX831CS Top Load Stacked...
Mar 02, 2010 | Frigidaire Kitchen Ranges
63 people viewed this question
Usually answered in minutes!