Question about Alpine Car Audio & Video

Open Question

How do I figure out the code 4 Bluetooth on my stereo Alpine CDA 9831

Posted by Merle Steen on

  • Merle Steen
    Merle Steen Jun 09, 2019

    Stereo was given to me..dont have instruction booklet..

×

Ad

5 Related Answers

blueextc3221

blueextc3221

  • 15935 Answers

SOURCE: Need Pinout

no - the harness is $17 or less.
Even Metra makes one (pictired above)
In my shop I charge $17 for the metra plug.
eBay it.
Metra part# AL16-0001 or al2x8-0001
CLICK HERE for an eBay auction for an original ALPINE plug. $30
CLICK HERE for an eBay auction for a $2 (shipped) one.

Thanks for using FixYa - a FixYa rating is appreciated for taking the time to answer your FREE question.

Posted on Mar 29, 2009

Ad

SOURCE: why does my alpine car

try to press and hold the power button for 5 secs. Then try to remove cables at the back of your cd receiver. make sure cables are perfectly aligned and connected properly. Then insert it back and press power button. Press menu button to get out of the demo mode and start inserting disc...

Posted on Dec 21, 2010

Ad
Ironfist109

Iron

  • 3018 Answers

SOURCE: How do I turn on

  • First you have to purchase a separately sold junction box and a portable telephone that is available from Nokia to control the incoming and outgoing call of the portable phone.
  • You must have a portable phone hooked up prior to the next step.
  • Press and hold the Band/Tel button for at least 2 seconds to turn on the telephone mode.


Regards, Tony

Posted on May 20, 2011

caroldon

Donald DCruz

  • 17130 Answers

SOURCE: need owners manual for alpine cda-9831

Please register you product in the following official link.

http://www.alpine-usa.com/support

Posted on Aug 02, 2011

kakima

  • 102366 Answers

SOURCE: What is the green cord on the back of the Alpine

From the wiring diagram on page 38 of this manual, it's the plus wire to the left rear speaker.

Posted on Feb 21, 2013

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Faceplate display only functions when you touch a knob or button


THE FACEPLATE HAS LIKE SOME PINS WHERE IT MAKES CONTACT THE FACE PLATE WITH THE STEREO BODY WITH A COTTON AND SOME ALCOHOL CLEAN THE CONECTOR THE ONES THAT ARE IN THE STEREO BODY AND THE FACE PLATE BUT WHEN YOU MAKE IT MAKE SURE THE CAR OR FACE ITS TURN OFF

Nov 02, 2013 | Alpine CDA-9831 CD Player

2 Answers

Need owners manual for alpine cda-9831


Please register you product in the following official link.

http://www.alpine-usa.com/support

Aug 02, 2011 | Alpine CDA-9831 CD Player

1 Answer

My Apline CDA-9831 has no sound when trying to play regular store bought CD's. It dose have sound on Tuner.


Are you using an amplifier? If so, make sure you are using the blue/white wire (amplifier remote turn on) instead of the blue (power antenna remote turn on) to turn your amplifier on. The blue wire turns off when leaving tuner mode.

Jun 28, 2011 | Alpine CDA-9831 CD Player

1 Answer

Alpine CDA-9831 No Sound From CD's? My Alpine 9831 has always worked fine on the "Tuner" setting in my stock 3 series BMW. But recently I put a CD in for the 1st time and the head unit shows...


Are you using an amplifier? If so make sure you are using the blue/white wire to turn your amp on. The blue wire is power antenna turn on and turns off when leaving tuner mode.

Jun 28, 2011 | Alpine CDA-9831 CD Player

1 Answer

How do I turn on bluetooth on an alpine cda-9831


  • First you have to purchase a separately sold junction box and a portable telephone that is available from Nokia to control the incoming and outgoing call of the portable phone.
  • You must have a portable phone hooked up prior to the next step.
  • Press and hold the Band/Tel button for at least 2 seconds to turn on the telephone mode.


Regards, Tony

May 20, 2011 | Alpine Car Audio & Video

1 Answer

I'VE CHECKED THE WIRES AND IT KEEPS TURNING OFF AND ON AND OFF AND ON AND OFF AND ON ALL THE TIME


The button on the remote is jammed or is shorted. If you can take the remote out of range and use teh stereo without this problem occurring you need a new remote which you should be able to order. If the problem persist it is the power button or circuit on the radio itself.

Nov 20, 2009 | Alpine CDA-9831 CD Player

1 Answer

Have an alpine 9886 stereo and cannot connect my blue tooth ready phone...


Hello maslynab,

The Alpine CDA-9886 is Bluetooth ready but requires an adapter such as Alpine's KCE-400BT or a generic adapter in order to pair with a phone.

Hope this helps.

Aug 05, 2009 | Alpine CDA-9886 Car CD/ MP3 Player

1 Answer

Need Pinout


no - the harness is $17 or less.
Even Metra makes one (pictired above)
In my shop I charge $17 for the metra plug.
eBay it.
Metra part# AL16-0001 or al2x8-0001
CLICK HERE for an eBay auction for an original ALPINE plug. $30
CLICK HERE for an eBay auction for a $2 (shipped) one.

Thanks for using FixYa - a FixYa rating is appreciated for taking the time to answer your FREE question.

Mar 29, 2009 | Alpine CDA-9831 CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5023 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you an Alpine Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...