Question about Lands Phones
Check out the settings there may be a setting for key pad tone. (off).
Posted on Jun 19, 2019
The blinking light on the speaker button means the forward when busy is on. To cancel it- With the handset on-hook dial #12.
Then press your own station number. Then dial # again. The speaker button should stop flickering.
Note: If the SPK button continues to flicker, Forward all is activated. It is the same process as above but use #11 instead of #12
Posted on Mar 12, 2008
The problem is possibly the keypad on the phone. Try another phone , preferrably a standard corded phone. If you still cannot break the dial tone, then the problem is with the telephone line (phone company)
Posted on Apr 01, 2008
SOURCE: No dial tone on handset
It may not be registed with the main unit. You may need to register the handset. With my uniden all i have to do is put it in the main base until it says what handset it is (it should be a number).
If you have any questions please dont hesitate to ask
Posted on Dec 02, 2008
I agree witht this solution, its a common fault, the admin soultion is to find a differnt headset feature access code!
Posted on Apr 15, 2009
if you can get dial tone with another phone, look into manual for any instructions, usually a toll free number for help. ( BEST ) otherwise take phone back for exchange. may be problem in the board.
Posted on Apr 16, 2009
Tips for a great answer:
Jan 02, 2016 | Asavings Panasonic KX-TGEA20S Dect 6.0 1...
Jul 13, 2011 | Panasonic KX-T7433B Corded Phone
Dec 09, 2010 | RCA 25205RE1 Phone
Sep 17, 2009 | Uniden DECT 6.0 Cordless Telephone...
Sep 25, 2008 | Uniden 2.4 GHz Cordless Phone System
Aug 11, 2008 | GE 29322GE1 Corded Phone
Oct 08, 2007 | Brother MultiFunction Center MFC-440CN...
Apr 27, 2007 | GE 29318GE1 Corded Phone
115 people viewed this question
Usually answered in minutes!