Question about Video Game Consoles & Games

1 Answer

Rear wheel on my tony hawk sypher huckjam bike is locked up

Posted by Kimberly Jones on

Ad

1 Answer

matt

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Video Game C... Master
  • 1,648 Answers

There are a few things that can be wrong, and based on what you said, you probably now have more than one fault. You need to isolate parts to find out what it is. Most of the of these checks can be done almost instantly without removing anything. The chain will get in the way - you won't need to remove it though.

  1. Remove the wheel from the bike and check the freewheel. It should be moving freely in one direction and locked up in the other
  2. Check the rear derailleur - is the chain running freely though it. If not, check the chain line and make sure the small sprockets are free spinning.
  3. Check the chain line though the front end. Is the chain clear of the derailleur and sitting properly on the chain ring.
  4. Spin the pedals and check the bottom bracket is not jammed up somehow. check the pedals and cranks are properly aligned and attached to the bottom bracket.

Posted on Jun 03, 2019

Ad

1 Related Answer

Anonymous

  • 347 Answers

SOURCE: on the tony hawk sypher

That is a brake cable.

The bike is equipped with a device to allow the bars to be spun around 360 degrees without binding the brake cables. If the brake cable did not go through the center then when you turned to far to the right or left the cable would get hung up and bind.

Posted on Dec 20, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TONY HAWK HUCK JAM MOD#8523-12 HOW DO I ADJUST FRONT BRAKE?


loosen the bolt at the back of the fork...then the cable hold the brake in your hand...center it and retighten the bolt...then adjust the cable..should be good.

Jul 04, 2013 | Hawk Tony Boom Boom Huckjam 20-Inch BMX...

1 Answer

How do I remove the crank bolt on a Tony Hawk Huckjam bike?


You need a crank extractor to pry the crank apart. Careful when threading the tool as the valleys and journals of the threads are prone to cross threading, thus stripping the tool.

Aug 05, 2012 | Video Game Consoles & Games

1 Answer

Im having a problem alighning the handle bars on my hammer jack how can i tighten them up?


The gooseneck, which is the piece that attaches directly to the handlebars.
If you look at it, you will see It has one bolt that doesn't clamp the bars to it. Tightening that bol will keep make yout handlebars stay aligned with your forks.

May 09, 2011 | Hawk Tony 's Huckjam Series Drop Mountain...

1 Answer

On the tony hawk sypher 18 inch boys bike what is the cable coming up the center of the gooseneck for?


That is a brake cable.

The bike is equipped with a device to allow the bars to be spun around 360 degrees without binding the brake cables. If the brake cable did not go through the center then when you turned to far to the right or left the cable would get hung up and bind.

Dec 19, 2010 | Dynacraft Cycling

1 Answer

Bike Manual


http://www.huckjambikes.com/manuals/Dynacraft%20Manual%202008a.pdf

Dec 25, 2009 | Hawk Tony 's Huckjam Series Drop Mountain...

3 Answers

Need seat for byke 26 series, how can I buy one? thanks


Visit a bike shop or a sporting goods store in your home town.

Thanks for using FixYa.com

a

Oct 28, 2009 | Hawk Tony 's Huckjam Series Drop Mountain...

2 Answers

Havin problems puttin the brakes on they have givin us the wrong instructions


Try this website:http://www.bikeguide.org/how-to/brakes/brakes.php It might give you some ideas.

Sep 28, 2009 | Hawk Tony Boom Boom Huckjam 20-Inch BMX...

1 Answer

Chain placement


hi joe,

here is a video for you in replacing the chain on your mountain bike. good luck.

http://www.youtube.com/watch?v=NMYGTc5bzNY

regards,

voodoo

Apr 14, 2009 | Hawk Tony 's Huckjam Series 21 Speed...

1 Answer

Installed new chain on nakamuru 21 spd now chain seems to want to skip when under load at rear sprocket


They are called coggs if they are at the rear, and sprockets at the front. What has happened is your old chain has worn dwn the metal on the rear coggs and there is'nt enough metal for the new chain to grab on to. You need a new coggset or a new freewheel

Mar 25, 2009 | Hawk Tony 's Huckjam Series 21 Speed...

Not finding what you are looking for?
Video Game Consoles & Games Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Video Game Consoles & Games Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Tom Chichester

Level 3 Expert

61131 Answers

Are you a Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...