Question about Whirlpool Dishwashers
Try unplugging it and wait 30 seconds plug it back in and it should reset the computer
Posted on May 31, 2019
Sometimes I have to push the cancel button on my Kitchenaid and start over and push the selection buttons again. and then push start. Don't know if this will help.
Posted on Jan 07, 2012
the flashing light is an error code,you either have a bad heater or the board is bad,once you reset it after like 6 or 7 wash loads it will start over again,if you remove the bottom kick panel,you'll find the tech sheet there,look up light flashes 7 times and it will tell you how to check the heater from the board to see if the heater or board is bad
Posted on Feb 25, 2018
Tips for a great answer:
Nov 04, 2015 | Whirlpool 24 in. GU980SCG Built-in...
Mar 25, 2013 | Whirlpool DU1055XTS Built-in Dishwasher
Aug 02, 2012 | Whirlpool Dishwashers
Mar 04, 2012 | Whirlpool Dishwashers
Jan 07, 2012 | Whirlpool Dishwashers
Jul 09, 2011 | Whirlpool Dishwashers
Jun 20, 2011 | Whirlpool Dishwashers
Jun 05, 2011 | Whirlpool 24 in. GU3200XTP Built-in...
Oct 12, 2008 | Whirlpool GU2400XTP Built-in Dishwasher
118 people viewed this question
Usually answered in minutes!