Changing the day of the week - Lands Phones

in the user manual it reads ---date and time menu
use the menu to select the clock ( if you have caller ID, the phone sets the date and time automatically)
enter the date and time, select AM or PM use CID/RIGHT to move the cursor past a digit without changing it
to confirm, press MENU/SELECT
to get a wrong day of the week it can only happen if the wrong year is appearing because if you want Jan 30 2016 it will come up as Saturday but if the year is 2015 it will have the wrong day for the 30 Jan

Facebook Customer Support:
Phone Number: 1-650-543-4800
Average Wait: 12 minutes - 24 hours, 7 days

As per the instruction PDF that I just read, the day of the week only changes with each 24 hour rotation. Therefore to change it, you might pull the crown out all the way and wind it through every hour in each day until it advances to the day you want. Then set the correct time. Push the crown in one notch to the second position and wind the dates forward until it stops on the one you want. It doesn't appear that going backwards for either the time (for day of the week) or date works.

The day program was taken out on newer models of Partner systems where it uses the date to figure out the day of the week.

Changing the date on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#101"
the display should say system date and the current data in mm,dd,yy format
enter the new date month, day then year
press feature "00" to logout
If you have an older model Partner system,you'll also have to enter in the day of the week in programming
Press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#102"
the display should say system day and the current programmed info
enter the new day, 1= sun, 2= mon, etc.
press feature "00" to logout

You have to check the box remember me,, if its already checked than its your internet browser, its deleting it everytime you close your browser, it deletes your history, i recommend going to your settings and changing the settings....

You have day ring in Dutch, not the English. Try to find out if there is English by slowly turning (changing) days.
Rate me, plz.

To change the time on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down, enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #55 the screen should say YYMMDDWHHMM
3) enter in the year, month, day, day of the week, hours and minutes(the day of the week values are 1= mon. 2= tues. etc.)
press # when finished.

Leave it a few days, they are changing every day and in every region. It will settle down in a week or so and software fixes will be around by then.

if you email me your adr - I will be happy to mail you a copy of the user's manual - - thanks Shayla

have you tried changing you're battery?