Question about Radio Communications
SOURCE: Radio Shack TRC-502 cb radio
Here is the owners manual I'l see if I can get my hands on a internal schematic
Posted on May 14, 2008
in most cases one of the 16 pins on the channel display has a bad contact, I have the displays in stock and ready to install if you need the work done.
Posted on Mar 05, 2010
press the manual button until you get to channels you locked out, then press Lockout and they will unlock.
Posted on Apr 16, 2010
The best way to set it is to get you a radio check, go to channel 19 and ask someone about three to five miles away to give you a radio check, start with your modulation all the way open and go from there.....hope this was helpful...
Posted on Apr 20, 2010
SOURCE: i have a 29ltd classic...no
Sounds like the mixer crystal has gone bad, or the VCO is out of whack, and the radio needs to be aligned.
worst case scenario is that the PLL has gone bad. In which case the radio will need to be fully aligned after replacing.
Posted on Nov 17, 2010
Tips for a great answer:
Apr 26, 2014 | Radio Shack Lot Of 3 Walkie Talkies 2 Way...
Oct 29, 2011 | Midland 1001Z 40-Channels Base CB Radio
Apr 07, 2011 | Uniden Radio Communications
Dec 28, 2010 | Cobra 29 LTD CB Radio
Dec 13, 2010 | Cobra 18 WX ST II 40-Channels Base CB...
Aug 19, 2010 | Cobra 148 GTL 120-Channels Base CB Radio
Apr 20, 2010 | Connex 3300 240-Channels Base CB Radio
Dec 08, 2008 | Motorola Talkabout Distance DPS (10...
Nov 08, 2007 | Connex 3300 240-Channels Base CB Radio
111 people viewed this question
Usually answered in minutes!