Audio Players & Recorders Logo

Related Topics:

Question about Cambridge Audio Audio Players & Recorders

Open Question

Cambridge Audio AV receiver 540 R seems to get pretty hot on the heatsink area as well as the DSP area . Drops volume level automatically

Posted by Arun Narula on

Ad

5 Related Answers

Anonymous

  • 2 Answers

SOURCE: volume level dropping unexpectadly

The A1 has an internal self diagnostic program which you can go through to find the fault. You can access the diagnostic program by simultaneously pushing some buttons on the front panel. The Yamaha service manual for the A1 tells how to do it and what the diagnostic codes mean. You can get a copy of the service manual on the web from several suppliers for a small fee.

Posted on Jan 20, 2008

Ad

Anonymous

  • 73 Answers

SOURCE: cambridge 640 amp, levels coming out r and l are different

Adjust "Balance" to center. If at center, something more serious in amp.
Paul

Posted on Jun 13, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: While wathching TV, the typical volume level

Cleared all AV settings and reprogrammed.

Posted on Jan 31, 2010

Anonymous

  • 1 Answer

SOURCE: NAD 7020e sudden volume drops, sudden distortion- intemittently

OK. I dont know the answer to your prob, but to let you konw that youre not in this alone, my amp used to occasionly lose considerable volume in one channel. this could be remedied by cracking the volume up to max for a half second or so. (Not a great solution!!) It has finally given up the ghost ...I have lost one channel and the doctor says it wont come back. Not only this but they claim that spares ceased to be sold back in the 90's. having said this I have enjoyed this amp for almost 20 years. I think its time to put it to pasture.

SNO

Posted on Apr 25, 2010

petraman7

Scott Frye

  • 1175 Answers

SOURCE: i want to buy a

Cambridge Audio will be the only people that have spares
Check their website

Posted on Sep 01, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

Cambridge azur 650R shows "PROTECT" after Volume more than 1/4, protection-relay works, loudspeakers&cable are o.k, WHY?/Solution (relay broken)?

What ohm rating does the receiver have and what ohm speakers are you connecting. If the receiver is rated for 8 ohm speakers and you are connecting 4 ohm speakers, you are overdriving the amplifier. This will cause the protection to trip. Also make sure your speakers polarity are matched. If they are out of phase this may also cause a problem.
0helpful
1answer

I want to buy a trasformer for cambridge audio radio ammplifiare azur 540 v2

Cambridge Audio will be the only people that have spares
Check their website
1helpful
1answer

Sony STR-DH510 Multi-channel AV receiver connected to cambridge soundworks ensemble IV w/ passive subwoofer: no sound from center channel during viewing, or during speaker level test- all other speakers...

The STR directs sound to the center as instructed by its speaker setup. You say the center does not work on calibration. Is it defined?

Prove another speaker does or does not work on the center output. Then we'll know if it's the receiver or the speaker ensemble that has the problem.

Have you checked the manual for this "
There is no sound, or only a very low-level sound is heard from the center/ surround. "?
0helpful
1answer

The receiver works ok until the vol is reduced and the right front channel drops out. Increasing the vol usually picks up the dead speaker but it drops out again when the vol is reduced. I've tried...

Make sure the audio level on the left and right channels are balanced. Check the menu for audio levels to adjust and make sure they are not maladjusted. If all levels are adjusted properly then the volume control or volume control circuity may be at fault.
0helpful
1answer

Low volume through amplifier

Turntables generate a very low signal. Phono inputs on receivers containa pre-amp section to boost the signal to "line level" or the same level as other audio devices. I would suspect that you need to add that pre-amp section. Phono preamps are available for around $20 or so and are inserted between the turntable and the standard audio input on the receiver or amp.

Hope this helps,
Dan
0helpful
1answer

While wathching TV, the typical volume level

Cleared all AV settings and reprogrammed.
0helpful
3answers

Yamaha DSP-A1 sound drops at startup

In the manual it says switch off leave for 30 seconds and switch back on .
0helpful
1answer

Cambridge 640 amp, levels coming out r and l are different

Adjust "Balance" to center. If at center, something more serious in amp.
Paul
0helpful
1answer

Volume level dropping unexpectadly

The A1 has an internal self diagnostic program which you can go through to find the fault. You can access the diagnostic program by simultaneously pushing some buttons on the front panel. The Yamaha service manual for the A1 tells how to do it and what the diagnostic codes mean. You can get a copy of the service manual on the web from several suppliers for a small fee.
Not finding what you are looking for?

38 views

Ask a Question

Usually answered in minutes!

Top Cambridge Audio Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5750 Answers

Brad Brown

Level 3 Expert

19166 Answers

The Knight
The Knight

Level 3 Expert

76851 Answers

Are you a Cambridge Audio Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...