Question about RCA Universal Remote 3 Device Remote Control

6 Answers

RCA RCR 3273 universal remote

I have figured out how to find the right code...howver, I have lost the book and can't figure out how to "lock" the code. I have always had to push the stop button, to lock the code, but cannot figure this one out.

Posted by alicia52076 on

  • 3 more comments 
  • EvilE Apr 07, 2008

    i have lot the book on how 2 use my remote there is no code search, what/how do i do??

  • Anonymous Apr 13, 2008

    I lost my code list for a tv sharp

  • Anonymous Aug 12, 2008

    rca universal remote

  • Anonymous Aug 31, 2008

    code for insignia 26 inch lcd

  • ggrannylou Mar 25, 2009

    I need help reprograming mine. Its worked fine for several months and chose now to quit on me.

×

Ad

6 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

For codes:

http://www.rca.com/codefinder

Posted on Sep 11, 2009

Ad

Anonymous

Make sure the device is on. Hold down the tv (or whichever device your trying to program) button and the power button simultaneously until the red light stays on solid. Then press the power button, it will flash one time, and keep pressing slowly letting it flash until the device turns off. Then press the stop button...and it is programmed.

Posted on Jul 20, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

IHAVE LOST THE CODE AND HOW TO SET UP MY UNIVERSAL REMOTE

Posted on Mar 20, 2008

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a zenith tv and a rca RCR 3273 universal remote what is the code?

Posted on Aug 19, 2009

Anonymous

I have the instructions and it says to push the stop button to save the code

Posted on Dec 20, 2007

Anonymous

This was soooooooooooooo true thank you i just pressed the power button and the component button and kept pressing the power button until the component went off and then pressed stop it saved the code!!!!!!!!!!!!! Great.........................:)

Posted on Sep 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I lost the combination to my speed dial master lock and it is in the locked position. How do I open it and create a new code?


It's not easy to fix this problem, because these locks do not shim open and it's not obvious how a person could figure out the old combo. I was able to loosen and remove the security screws, disassemble mine and repair it. They are very tricky to reassemble and it took me hours to find the spring that was out of position. The root problem was the lock did not clear when the shackle was pushed in. Until I figured that out, it would take up to 30 tries to get it open. The security screws are Metric - so you can replace them with regular screws until you get it working. If you do open the case, there are a lot of small parts inside, including a bunch of springs.

Aug 18, 2014 | Master 1500ID Combination Padlock

1 Answer

Code reset button


What are you trying to do ? I hope some of this helps.
..........................................................................................


button
12 menus appear that are unique to the Sony Ericcson k800i ...

K800i Secret Menu In this post I will write about a few hidden features of the K800i.
These codes should work on most Sony Ericsson models though, try for yourself.

.........................................................................................................

Service Menu

The Service menu can be accessed by pressing the following sequence while in the standby screen:

right, *, left, left, *, left, *

The phone now shows a menu titled 'Service' with 5 menu items:

  • Service info : Here you can view information regarding your handset such as the model number, software versions (firmware as well as other versions, like camera driver version, etc.)
  • Service Settings : Here you can switch USB charging on or off
  • Service Tests : Allows you to test every component of your phone, such as the keypad, microphone, speaker, LED, Display, etc. Any fault can be found out easily with this method.
    In this section, You can also check the Total call time, the number of hours you have called.
  • Text Labels : Better leave this section alone.
  • Discharge Flash : To discharge the camera flash fully.

In addition to the Service Menu, SE's also offer a 'Personalize' menu.
It can be accessed by the sequence
left, *, *, left

But unlike the Service Menu, the Personalize menu is for trained experts only. So it's better not to tinker with these settings. Still, it's cool to know your phone's got all these things under the hood right?

---

Want to see something cool?

Access the ServiceMenu. Now Navigate to Service Info > Model Info.

While the Model is displayed, press the folowing key sequence :
2, 4, 6, 8

\m/ SE \m/

..........................................................................................................

Stop thieves running up huge mobile bills by locking your Sony Ericsson K800i and protecting it with a PIN To protect your phone from unauthorised use you can set a phone lock to stop others using it.
The default phone lock code on the K800i is 0000, so it is best to change this number to one you can easily remember in case it is lost or stolen. To change your unlock code:
  • From the Menu screen, select Settings (Figure 1).
  • On the General tab, scroll down to Security (Figure 2).
  • Select Locks (Figure 3) and then Phone Protection (Figure 4).
  • Select Change Code (Figure 5).
  • Enter the default code then enter (And re-enter) your new one (Figure 6).
Once you have changed your phone lock, you can then set to either On, Off or Automatic (Figure 7). When it is turned On, you must enter your code when you turn the phone on, Off means you don't need to enter a code. Automatic means that you only enter the phone lock code when a new Sim-card is inserted into it.

Apr 13, 2014 | Sony Ericsson K800i Cell Phones

1 Answer

I bought a trailer from someone and he had the supra lock box on it and I asked him what was that and he told me and also told me he lost the combination # and I found it written on the inside of the door...


Get some heavy duty penetrating oil and spray in all the crevices. Remember right 3, left 2 then last number. If it's one of those 4 digit dial in locks be sure to push in then pull out to open. For a better answer post a picture.

Sep 21, 2017 | Supra 001004 Push Button Lock Box Key Safe

2 Answers

I have a kwickstet smartcode touchpad keyless entry. When I push the lock button it opens and when I do the code it locks?


I have included a link to the installation instructions for the Kwikset 909 lock. I think that if you go through the installation instruction routine carefully, you will solve your problem. Pay particular attention to Step 8, the synchronization routine.

http://s7d5.scene7.com/is/content/BDHHI/kwikset-smartcode

Good luck!

Mar 31, 2011 | Kwikset Locks & Locksmithing

1 Answer

Need basic settings for Baby Lock BL450 Serger. Any idea where I can get it?? My book was lost. The threads don't wrap around the edge of the fabric. I've re-loaded 3 times following the diagram on...


Hi GailKelley,
I have the same model serger. I will make a copy of the stitches and figure out how to get it to you. I recently took my serger out of storage to start some projects. I always struggle threading it but love the look of the stitches when it is set up correctly. Be in touch. MnFriend

Oct 25, 2010 | Baby Lock Eclipse Serger

1 Answer

I need the manual so i can reprogram the unit


This is the sequence that I came up with.
Good or bad,please rate my post?
Thanks
Bob

Resetting the Code/Combination From a Lost Code
Simplex LP1000
Important: There is no procedure for finding an unknown combination from the front of the lock. A lost combination must be cleared by removing the combination chamber from the lock housing, then a new combination can be set.
LP1000 Series FAQ
Resetting the Code/Combination From a Lost Code
1. Remove the back plate from the front lock housing by removing the six back plate screws.
2. Remove the two Phillips head screws (F) securing the guide bracket (D
to the front housing. Grasp the guide bracket and slide it back to
disengage it from the clutch linkage (see figure 1).
3. Lift the two chamber links (A) off of the control shaft (B) using a small flat blade screwdriver. Mark links to assure proper reassembly (see figure 1).
4. Remove the combination chamber (E) by removing the Phillips head screws (G) at each end of the chamber (see figure 1).
5. Remove shaft bushing (C) from control shaft (see figure 1).
6. Remove chamber cover marked ILCO UNICAN (A) (see figure 2) by gently tapping the lip of the chamber cover (A) at the control shaft end of the
chamber (see figure 3) with a screwdriver to detach it from the staked joints (B).
7. Lay the chamber on its side as shown in figure 4.
8. With tweezers, or other tool, slide the "E" ring (B) off the unlocking slide
stud (A) (see figure 17-4), then gently lift the end of the unlocking slide (C) over the unlocking slide stud (A) (see figure 5).
Note: The unlocking slide (C) is under spring tension and will be easier to lift if pushed to the left to ease tension. Swing the unlocking slide (C) sufficiently to clear the gears, (D) no further than shown in figure 5.
9. Depress the lockout slide (E) as shown in figure 6. The gears (D) are now free to rotate.
10. Turn each gear (D) so that the slots (F) are aligned as shown in figure 6.
11. Return the unlocking slide (C) over the unlocking slide studs (A) while making certain the five toes (G) are engaged in the five gear pockets (F). It may be necessary to adjust each gear (D) slightly to make proper alignment between toes and gear slots (see figures 6 & 7).
Re-secure the "E" ring on the stud (A). Your chamber will now resemble figure 7 and is ready for reassembly with the lock housing.
REASSEMBLY
1. Re-secure the chamber cover (A) marked ILCO UNICAN. Make sure the staked joints (B) (see figure 2) on both end plates fit through both slots on the chamber cover.
2. Re-secure the shaft bushing (C) with flat side facing up (see figure 8).
3. Secure the combination chamber with the two Phillips head screws (G) you removed earlier.
4. Re-secure the chamber links (A) onto the control shaft.
5. Replace the guide bracket (D) by aligning the clutch linkage in the guide bracket and secure with the two Phillips head screws (F) previously removed.
6. Replace the back plate and secure it with the six back plate screws.
SETTING THE COMBINATION
Do not attempt to set a combination until the complete unit has been reassembled.
Perform the following steps in the order shown.
1. Turn the outside lever once to the stop position and then release.
2. Enter the new combination.
3. Turn the outside lever to the stop position, make sure the latch is fully retracted, then release
the lever.

Aug 11, 2010 | Simplex Kaba Ilco Unican LP1000...

1 Answer

Cannot figure out how to reprogram the audio code...where do i push the numbers in??


on the preset buttons. must be the right code, you may find it inside the glove box in the warrenty book or a sticker on side or in glove box, usually a 5 digit #

Jan 17, 2010 | 2004 Honda Odyssey

1 Answer

I lost my unlock code what can i do?


I got this from another users post, kirbykirbykirby3, it is not mine, though I have added a little bit more information:
--------------------------------------------------------------------------

Here's how I find out the MSL/SPC from the U350, works with almost any phone.

QXDM, Connect it via Serial Port.

Go to command output:

Type in Password "password 1945081520081106"

Without the quotes

Press Enter Key

then type in "requestnvitemread sec_code"

Without the quotes

Press Enter Key

there you go, security code right there.

You can also change anything you want... hehe.

--------------------------------------------------------------------------
Now boot up Samsung PSTLite, double click your phone U350, then click on 'Prepay' in the lower left corner, then click on read phone, then input the security code you got with QXDM for the 'Input MSL Code'. You can then click on info, settings, transfer, etc., make a backup of your address book, even edit it. I have not figured out how to get at the pictures with this method though. If you figure that one out, please post here as I am subscribed to this thread. Thank you. Samsung PSTLite will also give your your two lock codes. Your personal one & the phones code.

Oct 26, 2009 | Samsung Smooth SCH-u350 Cell Phone

1 Answer

Lost book, need to figure out codes for the original RCA DVD Player Model #RC5240PB


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/

Apr 25, 2009 | RCA Universal Remote Control

2 Answers

T.v. remote codes


Yes the GE universal remote #24914 works to change your Ilo tv from analog to digital and switch to vid1 or vid2 ect.... The code is in the book that comes with the remote. I use this remote myself. This remote can be bought at Target for under $10.It works all the features.

Feb 27, 2009 | iLO IWT3206 TV

Not finding what you are looking for?
Televison & Video Logo

6,565 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76390 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6113 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...