Turn off sub power switch not the main! Then press 2 and 5 and turn on the sub power switch which puts you in MODE 25 select #5 Password setting. Then select #1 key operator setting. Default might be 9272.
SOURCE: konica minolta c 200 password
It was 12345678 for our C250 - hope this helps. And sys_admin (solution 1) - You are a complete idiot. Your answer was useless. If you were working for me, I'ld fire you...
SOURCE: need to reset admin code for konica minolta c-350
Hello
press utility/counter - then under the counter "details" - stop 0 0 stop 01 -
now you are in service mode, - stop 0 C, and there shold be admin pwd
SOURCE: How do you do a hard reset on a Konica Minolta BH 600?
To recover/change the Administrator password perform the following;
1. Enter the Service mode.
2. Press STOP-0-CLEAR to enter the Enhanced security mode.
3. Enter Administrator Password setting, and enter new Password.
SOURCE: konica minolta 7222 model f-35-4
Related with the heater. check two thermistors and other parts if the avery thing is ok then:
Reset code using 25 mode, dipswitch 3, bit 1 is the fuser reset command "0" is no and "1"for yes
presumably this means that if you must reset a fuser fault, you enter this mode, select dipswitch 3,select bit 1 and change no to yes , by pressing "ON"
197 views
Usually answered in minutes!
×