Question about Konica Minolta bizhub Office Equipment & Supplies
Power off the machine. Then remove the toner bottle, be careful the hole might be on the bottom and the toner is going to go everywhere. Then close the toner cover and turn on the machine. Let the machine go through it normal routine. When it asks for toner install the toner bottle correctly. If that does not work, you might have a bad motor or the home sensor or actuator for the toner bottle is bad worse case the control board is bad.
Does it say image unit or drum????????
Posted on Mar 22, 2020
Because you need to clean and shake the toner unit. When you say " ive been fixing" does it mean that you now what you are doing or?
If yes dismantle the toner unit and vacume it, it may be that toner stucked on "antena" for toner recognitions.
If not - call service
Posted on May 10, 2010
Code M2 means your photocopier machine require maintenance.In maintenance some old parts of your machine will be replaced with the new one and all this will be performed by technical services representative.
Posted on Jan 01, 2011
Konika Minolta BizHub 163 - Error Code M2
Press the Utility button,
then Stop 0 0
then press again Stop 0 1
then scroll to Clear Data, and then Supplies Data and clear.
You must be aware that clearing this counter clears the drum, developer and other counters.
Posted on May 21, 2013
Tips for a great answer:
May 31, 2018 | Toshiba Office Equipment & Supplies
Aug 15, 2017 | Konica Minolta Office Equipment & Supplies
Aug 25, 2015 | Konica Minolta Bizhub 501 Copier
Apr 10, 2014 | Konica Minolta Office Equipment & Supplies
Jan 09, 2013 | Konica Minolta bizhub C450P Laser Printer
Sep 16, 2012 | Konica Minolta bizhub 180 All-In-One...
Dec 29, 2010 | Sharp AR-5316 Advanced Digital Imager...
Dec 17, 2010 | Konica Minolta bizhub 180 All-In-One...
Sep 29, 2010 | Konica Minolta bizhub 180 All-In-One...
Nov 06, 2009 | Konica Minolta bizhub 180 All-In-One...
53 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 1 Expert
Level 2 Expert
Step 2: Please assign your manual to a product: