How to change view on cameras - GE Security DVMRe-16CT-600 16-CHANNEL Color Triplex Multiplexer-Recorder with 600-GB Hard Drive, Ethernet

In what way do you wish to change the camera 'view' ? You just point the camera at whatever you wish to photograph.

When you rotated pictures you changed picture size and definition, that is the reason why camera does not display them again.
If you check file size, you will see that rotated pictures are smaller than regular ones.
There is no way to get picture to original definition once you reduce it, however if you use a program like Photoshop you can check size and definition on original pictures, and re-rotate and resize rotated pictures to send them back to the camera, quality will be poorer than originals. Attributes to check are length and width (preferably in pixels) and definition, then you save pictures as best quality.

You need to open Device Manager
On XP:

• Open Control Panel
• Change the view to CLassic View
  
• Double click System
• Click on Hardware Tab
• Click on Device Manager
• You will notice a yellow triangle on the driver, right click and delete it
• Disconnect the camera and reconnect it and the software should install properly

On Vista/7:

• Open Control Panel
• Change the view to Classic view or large icons in 7
  
• Double click on Device Manager
• Follow the above steps

Hopefully you should have a working camera.

cant see them on your camera or on your computer? if you can not view your pics on your camera via "view mode" try putting your memory card on your computer. if your view mode on your camera does not work then there is really nothing you can do about it but have it serviced!
also try changing the resolution settings on your camera and see if you can view them at a lower resolution!

i hav the same cam. its bcoz u lost the thump files

you've got to change the view... it may be on the outdoors view. On the side of the camera opposite the batteries, there's a switch that has a flower, and two piramids. Change it to the piramids and turn on the flash

One of the buttons is constant presset in.
Under the button is a metal membrame, sometimes it happens by to mutch force the membrame is defect, it doesn't popup again.
Try to find out witch button doesn feal good anymore, can you work without it ?(for example left macro), open camera and remove membrame.
LKet it repait by fuiji ? a least € 100,-.more than new....

I had the same problem, it is the switch inside that is broken which allows you to switch back and forth between viewing pictures and taking them. There isn't really a fix besides getting the switch replaced and I am having a very hard time trying to find parts for mine. Good luck.

sounds like currupt memory

This is a button/firmware problem Canon Customer support will advise on your next move -depending on the age of the camera