Question about Sony Ericsson HBH-PV705 Headset

4 Answers

Hbh-pv705 my headset is flashing red and green as if in pairing mode how do i get it back to normal mode please. also my fone cant pair with it suddenly it has been working perfectly for the last six months

Posted by ianduff on

  • Anonymous Jul 17, 2008

    same cant get it connected ive checked compatibility nothing happens just red and green light enter 0000 key in then turns it sen off. help

×

Ad

4 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had this problem. I fixed it doing follow: hold volume keys together, so the indicator is flashed red and green (reset to default settings mode). Then press power button to turn the headset off. Then turn it on again and try to find the headset again from my phone. Then select "pair" from phone menu and typed "0000". The led stopped flashing and headset was connected. Before this my phone couldn't see the headset at all. Hope it will help you! (sorry for my English, I'm from Russia =))

Posted on Aug 06, 2008

Ad

nithinbsed

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I am connected bluetooth device HBH PV705 in computer windows 7 . Device not connected bluetooth driver (bluetooth peripheral Device) not updated. please help me, wat can update plz send sit link

Posted on Jan 06, 2011

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I´ve bought the headset and follow the instruccions from below and it was very helpfull it´s very simple all you have to do is push volume controls at same time when headset is ON then will start to flash red/green light on it , so thats it you can add the headset !

Posted on Sep 20, 2008

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I m not getting green red flash when i press volume buttons.plz help me

Posted on Dec 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IPhone 4 s not recognizing the 232


Once you make your iphone discoverable, then put the Plantronics 232 headset into pairing mode by pressing the call control button until it flashes red and blue. If it's not flashing red and blue, then it is not in pairing mode. Below is a link for the pairing instructions for the 230 headset (which is the same as the 232):

Plantronics Explorer 230/232 Pairing Instructions

Good luck from Headsets Direct!

Nov 23, 2011 | Plantronics Explorer 232 Bluetooth Headset

2 Answers

I have a h700 bluethooth and dont have a manual. what color should the light be when connecting to the phone, in use, and charging.


The indicator turns red when charging and turns green when fully charged. The headset will flash in purple when it is in discovery mode (mode where it is looking for a device to be paired with it). If it has already been paired with a device it is blue and then flashes blue when it is paired. The link for the manual is below. http://www.motorola.com/mdirect/manuals/QG-H700_9499A88O.pdf

Jul 23, 2011 | Motorola Mobility H700 Wireless Headset

2 Answers

I can't connect with my phone


Please follow the detailed instructions below for the proper pairing of the headset with your phone.

CHARGING

Before using, you must first charge your headset.
20 minutes = minimum charge
2 hours = full charge
Light is solid red when battery is charging.
NOTE For the best user experience, keep your headset fully charged.
CAUTION Do not use headset while charging and do not connect the charger while the headset is in use.

POWERING
Press the control button for 2 seconds to power on. Press the control button for 3 seconds to power off.

PAIRING
Step One:
Prepare Phone- Turn on Bluetooth For most phones, go to Settings/Tools menu and select Bluetooth or Connectivity and select "On."
Step Two:
Prepare Headset- Pairing Mode Begin with headset turned off. Turn headset on (hold call control button for four seconds until the light flashes blue) and it will automatically go into pairing mode, flashing red and blue.
Step Three:
Pairing- Add Headset to Phone For most phones, go to Settings/Tools
> Bluetooth > Search or Add a Device, then Select "220Plantronics." For passkey enter
0000. Headset will flash blue when paired successfully. It is now powered on and ready to use.

NOTE: Normally you only need to pair the headset and handset once. If headset has been previously paired with another device, follow pairing instructions below.

If headset has been previously paired with another device, please follow these instructions for pairing a second time. Be sure the headset is fully charged.

Begin with headset turned off.
1. Press and hold down the call control button for 8 seconds until the headset status
indicator begins to flash blue then red.The headset is now in pairing mode for the next 120 seconds.
2. While the headset is flashing,use the phone menu to search for Bluetooth devices and select "220Plantronics."
3. When prompted for a passkey, enter 0000. Headset will flash blue when paired successfully.

NOTE: The headset can pair to multiple Bluetooth devices, but will only connect to one device at a time. The headset will automatically connect to the last device to which it was connected.
Please don't forget to rate me if satisfied.Thanks for choosing Fixya.Good Luck.

Jun 11, 2011 | Plantronics Explorer 220 Bluetooth Headset...

1 Answer

Cant set to my phone


Once you make your cell phone discoverable, then put the Plantronics Voyager Pro headset into pairing mode by holding the power button until the headset flashes red and blue. Here is the link below for the Voyager Pro pairing instructions.

Plantronics Voyager Pro Pairing Instructions

Good luck from Headsets Direct!

Dec 13, 2010 | Plantronics Voyager PRO Bluetooth Headset

1 Answer

I cant program my bluetooth to my phone


Be sure the the headset in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF, then hold the power button until it goes into pairing mode as discribed above.
Then you can discover it with your phone or PC. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999

Dec 27, 2009 | Panasonic BLUETOOTH HANDS FREE KIT...

1 Answer

Pair to a sony ericsson w760a to a just wireless bt-35k2 bluetooth wireless head set


Put your device in search mode.

Put the bt-35k2 headset in pairing mode.
(Press the ON button but hold it down for about 6 seconds. As I recall, it will flash intermittent blue and red; either way, you will certainly see flash sequence that is not normal "blue" mode.)

Once device detects headset, you'll be prompted for passkey; enter 0000. Pairing will complete once authenticated.

Dec 26, 2009 | Just Wireless Bluetooth Headset Wireless...

5 Answers

Pin number for philips SHB6100 aside from 0000.


yeah hedenram is right. my problem was that i was trying to pair something WITHOUT the headset in pairing mode. just switching it on doesnt put the headset in pairing mode and it will reject the 0000 passkey even if this is correct. it is vital when you turn on you hold the power button til it flashes red/green and then it will be in pairing mode and accept the 0000. the only way i found this was in the instruction booklet which i thought i had chucked away

Oct 22, 2008 | Philips VOX120 Wireless Headset

1 Answer

Discoverable mode for plantronics


1.Turn on both devices (phone and headset)
2. Place the headset in pairing mode by holding the Call Control button (by the mic) down while rotating the Multi-Function Dial upward. Release the buttons when the Status Indicator begins to flash red then green.
3 Use your phon's menu to search for Bluetooth audeo devices and select M2500 by Plantronics when it appears on the display.

Jul 12, 2008 | Plantronics M2500 Consumer Headset

1 Answer

CABLE & WIRELESS CWBTH160


To initiate pairing, put the devices within 0.5m of eachother

Make sure phone / pc bluetooth is on and discoverable
Make surea headset is fully charged

  1. Ensure headset is switched OFF
  2. Press and hold the talk button (big central button on front of headset) until the indicator flashes red & green alternately, then release. Headset now ready for pairing.
    Note: Headset pairing mode will time out after 5 mins.
  3. To allow phone / pc to "find" the headset, consult your phone / pc bluetooth operating guide on pairing devices.
  4. Headset should be listed on phone / pc after search has finished - highlight and select the headset.
  5. A pin or password screen will appear, you must enter 0000 and confirm.
  6. When pairing is successful, headset indicator will change to green and flash continuously every 3 seconds.
Pairing is then complete.

Note: Multi-pairing.
It is possible to pair up to two phones with the headset - the most recently paired phone becomes the "primary "phone... only one phone can be connected at a time --> this function only works in Hands-Free profile. If both phones are in range, then the headset will connect to the "primary" phone first.

Apr 09, 2008 | Radio Communications

2 Answers

Bluetooth ear piece


blinking red and green means the headset is in pairing mode and ready to be connected to your phone. This means it is either the first time you have paired the headset or you have depressed the volume +/- buttons simultaneously for more than 5 seconds. If your phone cannot find the headset, it may be a compatibility issue. Try pairing the headset with a friends phone, possibly a sony ericsson. Good luck.

Jul 15, 2007 | Sony Ericsson Akono HBH-608 Wireless...

Not finding what you are looking for?
Sony Ericsson HBH-PV705 Headset Logo

899 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Radio Communications Experts

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

31530 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Sony Ericsson Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...