HOW DO I CONNECT MY SENNHEISER RS 120 HEADPHONES TO MY LG UHD TV MODEL 55UK63

SOURCE: Sennheiser RS 130 Wireless Surround Sound Headphones

Did you try to remove the batteries and at the same time unplug the power of the base for 30 sec ?

Posted on Jan 21, 2008

SOURCE: unable to listen to my wireless

They need a minimum level of signal to switch on the transmitter.
Verify if it works on yet another system.
Make sure you have the right output on your Samsung.
Try to increase the output level of your Samsung...(up the volume, but it may be a fixed output..)

Posted on Mar 08, 2008

SOURCE: My sennheiser 120 headphones are wearing out. After much use.

You can buy the HDR 120 model which is basically the headphones lone
These will work with the base in conjunction with the set you have now.. or as a replacement
You can also buy replaceable ear cups for less than 20 dollars (check the Sennheiser website)
Finally you may want to replace the rechargeable batteries in the headphones you have
Just make sure you replace them with the exact type.. I believe those are NiMh AAA
Pop them out and go to any Battery Plus or Radio Shack.. a new set probably run you less than 7 bucks
My point.. for less than 30 dollars you can have your old headphones working and looking like new ones
Give the new batteries an overnight charge before using them

Good luck

Posted on Apr 30, 2009

SOURCE: audio from tv is not restored by turning off power on headphones

It sounds as if you are plugging the base into a standard headphone jack located on the Television set.

RCA Headphone jacks (incl mini) automatically stop the sound output to the main speakers on almost every set I have seen.. or home stereo.. etc etc

In other words you can take a standard RCA jack.. with nothing connected to it.. plug it in while the music or sound is coming out the main speaker.. and it will cut off the output to those speakers..

If you set has audio outputs on the back.. preferably Fixed Audio Out .. you will need to connect your base unit to those.. turn your set volume to 0 and adjust the headset volume using the control on the right ear-cup.

If you have variable audio out.. you will need to go into your TV sets setup menu.. turn off the speaker.. and turn up the set until you achieve a signal and decent volume through the headset.

If you are missing these connections.. your current “work around” is your only solution.

Best of luck

Posted on Jul 07, 2009

SOURCE: sennheiser hdr 120 headphones no longer hold a

Twist the pad counterclockwise on the left earpice. You'll find the batteries underneath.

Posted on Mar 06, 2010