Question about Home
check volume setting.
if you have a manuval volume control try to clean inside of volumecontrol.if ok fine
if not ok Replace volume control with same type( new one.).
Posted on Nov 20, 2008
With only limited information provided about your type of actual antique clock this symptom has to conclude that your clock is a non self correcting style.
Step one: Ensure clock is striking the hour. during the time of the hour strike quickly move the minute hand to the hour.
Step two: Move to the half hour allow to strike, move hand to hour allow to strike then move the hour hand to align with the correct count.
Step three: Stop the clock until the correct time has been achieved and start clock OR strike ever hour and half hour until clock is set to the correct time.
Hope this tip guides you to a solution for your clock.
Posted on Apr 06, 2010
Testimonial: "Thank you! Thank you! My clock now runs on time. Your advice was accurate and easy to follow. A+++"
Press and hold the mode button until the year starts flashing in the upper left. Tap the mode button 3 times. You will see "24hr" with the 24 flashing. Press the + or - button on the back. Press the mode button 4 more times (or just leave it alone for about 30 seconds and it will go back to the normal display).
Posted on Apr 08, 2010
Take the batteries out from the base, where the chime mechanism is. Wait till it gets close (20 seconds till) to a specific hour time, like 8:00 or 9:00, replace the batteries for the chime mechanism. And then count the chimes at the hour. If they are correct, you are set. If they are incorrect, turn the time back 15 minutes before the hour and bring it right back and monitor the chimes again. Hopefully this should fix it. Please post the results.
Posted on Nov 10, 2010
SOURCE: I have a Seth Thomas
The next time it chimes multiple times turn the hour hand clockwise until it is pointing at the number of times it gonged. Next take off the dial nut off (make sure to put it in a plastic bag because they can be hard to replace) and turn the minute hand until it chimes signaling 15 minutes after. Now put the minute hand back on pointing to 3 o'clock and replace your dial nut and you are all set.
Fix Clock That Gongs Wrong
Posted on Feb 24, 2017
Tips for a great answer:
Nov 09, 2016 | Home
Oct 13, 2015 | Home
Jun 25, 2015 | Home
Aug 19, 2014 | Home
Mar 26, 2014 | Home
Jan 12, 2014 | Howard Miller Greer Chiming Quartz Wall...
Sep 13, 2010 | Watches
Aug 05, 2010 | Seth Thomas Watches
Apr 06, 2010 | Watches
Nov 10, 2008 | SkyScan 86709 Atomic Wall Clock
123 people viewed this question
Usually answered in minutes!