Question about Vizio Televison & Video
Vizio D55U-D1 I performed a visual inspection and noticed a burnt spot on both sides of the video (main) board. Nothing else appeared burnt or loose. New board is in and the same problem remains. I'm not sure what to test (meter) or what I'm looking for to diagnose the problem any further.
Sounds like the backlight is not working. Check the LED backlight driver board.
Posted on Apr 16, 2019
You can look at the various module failure symptoms and service / replacement options for the L42HDTV10A here:
Posted on Apr 25, 2013
It may be an input cable problem. Check hdmi and or coax cables to make sure they are not damaged . If you have another tv hook cables up to it to make sure they are working. Hope this helps.
Posted on Dec 31, 2013
Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
Posted on Dec 09, 2014
In my whole career as a tech, I never had a defect on a place I would have wanted it. And believe me, if an integrated circuit is defect, or even a diode, you won't see it on the outside of the component. Most of the time you need more than just a multimeter. Any way, to use it, you at least should have a diagram pointing out what voltages you should measure on what point. If not it is pointless.
Be aware even the 120 volt AC, can be deadly, so don't play around with that voltage.
Posted on Jan 13, 2015
SOURCE: 2nd try see last sentences....lg led 32ln5310 tv, sound but no picture, no backlights, nothing visible on flashlight test, what should I replace? Main board, T-Con Board, Power Supply board or Leds
The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
Posted on Feb 10, 2017
Tips for a great answer:
Jul 18, 2016 | Televison & Video
Jan 26, 2016 | Samsung Televison & Video
Oct 23, 2015 | Televison & Video
Dec 08, 2014 | LG Televison & Video
Mar 18, 2011 | Canon PowerShot A460 Digital Camera
Jul 18, 2010 | Samsung T220HD LCD Monitor
May 23, 2010 | Sony Cyber-shot DSC-S730 Digital Camera
May 15, 2010 | Sharp LC-32SH20U 32 in. LCD HDTV
Feb 26, 2010 | HP Pavilion dv5-1125nr Notebook
Jul 08, 2009 | Dell Inspiron 1525 Notebook
Oct 24, 2019 | Vizio Televison & Video
Jul 15, 2019 | Vizio Televison & Video
34 people viewed this question
Usually answered in minutes!