Question about Watches

1 Answer

I can't set the proper time on my new sketchers watch. I've followed the instructions and nothing is working

The R2 button is not working and I can't change the time from the 24hr setting.

Posted by Brenda Savage on

Ad

1 Answer

Here2HelpYou

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 592 Answers

Take it back and exchange it for another one, if it has an issue with a button not working properly and it's new then that's the only thing to do, you could call the customer service/technical support number in the owners manual yak before taking it back just to make sure it's not a simple fix, but no worries because if they don't assist you in fixing it over the phone you can always just take it back and exchange it! Thanks & Have a Great Day! If this was helpful please let me know by clicking the green button!
I can't set the proper time on my new sketchers wa - 9a4d56ff-9bbd-4104-a376-28a185ddec89-mllhxmajfunukklrwo4s204y-3-9.jpeg

Posted on Apr 13, 2019

Ad

5 Related Answers

VOTIT

LORETO LACARON

  • 2071 Answers

SOURCE: I cannot set the digital time on diesel watch DZ7101

First look for the set button then press it ,a long press and If it is blinking that's the time you to select the hour ,the minutes,the day/date,the alarms and the special features of your watch.The right button the up and down or for scrolling.Try all of this so your time will set.

Hope it may help you;

Regards;
VOTIT DON'T FORGET TO RATE

Posted on Jan 11, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: How to set watch

I just set the time on mine with these instructions 1) With the watch in the regular time display mode (doesn't matter if 12 hour or military time), depress and hold the lower left hand button (mode button). After a few seconds the watch appears to shift to alarm mode and it is blinking. This puts you into the mode for adjusting the alarm.

2) If you want to adjust time, date, etc rather than alarm time, after you have done step one, simply press that same lower left button again, and then it will put you into the time mode, but this time the time mode is blinking and you can adjust the various components (seconds, minutes, hours) then you can use the upper right hand button to navigate thru seconds, minutes and hours. Then you can change the time with the lower right hand button you can only change the time forward. I hope this helps !!!

Posted on Feb 25, 2009

escapement

Arturs Kalnins

  • 2338 Answers

SOURCE: I have a Ladies Armitron All Sport watch Model

Follow this link and find instructions for your watch:

http://www.armitron.com/watch_instructions.asp

Do not forget to rate, please.

Posted on Mar 09, 2009

Anonymous

  • 1 Answer

SOURCE: Toshiba ER-684 microwave time setting?

clock - clear - enter time - clock

Posted on Jun 20, 2009

Anonymous

  • 1 Answer

SOURCE: Acqua Indiglo watch

Can't understand instructions

Posted on Aug 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CHANGE FROM MILITARY TIME TO REGULAR


Hold down the MODE button until the time starts flashing. Then use the buttons to cycle through the time, date, and so forth until you see 24hr. On that menu tap the buttons you use to change the setting to cycle it to 12hr.

Feb 01, 2015 | Casio LA670WA-1 Wrist Watch

1 Answer

Watch Manual for Sergio Valente model# F-IAGAG


These are operating instructions for an SV F-IAGAG (Sergio Valente) watch.

There are four buttons on the watch.

A: upper left
B: lower left
C: upper right
D: lower right

Pressing A turns on the watch face backlight.

Pressing B changes the mode.

From the normal time display mode, one press of B enters the stopwatch mode. In this mode, pressing C will start the stopwatch time count. Pressing C again will stop the count. Each additional press of C will start/stop the count. While the count is proceeding, pressing D will freeze the display of stopwatch time, yet the count will continue. Pressing D again will cause the display to begin updating with the running count. Each press of D will freeze/unfreeze the display update. When the count is stopped (with a press of C), pressing D will reset the count to zero. From this mode, press B again to return to time display mode.

From the normal time display mode, two presses of B enters the alarm time set mode. In this mode, either the hour or minute portion of the time display will be flashing. That which is flashing can be changed by pressing C. Pressing D will switch to the other portion (hours or minutes). Any time the alarm mode is entered and a change is made, the alarm is set to "on". This is indicated by a check mark in the circle display next to the "9" on the watch face. The alarm can be toggled "on" and "off" from the normal time display mode by holding down button D and pressing button C. Return to the normal time display mode by pressing button B while in the alarm time set mode.

From the normal time display mode, three presses of B enters the time set mode. Upon first entering this mode, the seconds display in the circle near the watch face "3" will be flashing. Pressing button C will reset the seconds to zero. Each press of the D button will advance to a different value field for adjustment. The field of adjustment will be flashing. The sequence of fields is (seconds - minutes - hours - date day - date month - date day). Pressing C will change the value. When adjusting the hours, both 24hr format, and 12hr AM/PM format is available. Each press of button C will advance the hour value. The sequence of 24hr format will be indicated with an "H" in the "seconds" circle (near the watch face "3"). After hour value 24 of the 24hr format, the next hour is a "12" value, with an "A" in the seconds circle. Twelve presses of button C will step through the AM hour values and present an "12" value with a "P" in the seconds circle. Twelve more presses advances through the PM hour values and returns to the 24hr format. Pressing button B will return to time display mode.

Pressing button C while holding down button D will toggle the alarm "on/off" state. The "on" state is indicated with a check mark in the display circle next to the "9" on the watch face.

Jan 08, 2012 | Watches

1 Answer

I just bought an adidas ADH4033. I have read through the manual thousands of times and have figured out how to change the hours on the watch but still cannot change the minutes, date, 12/24 hour, or any...


this might help. press and hold top right button to change to T1 or time 1. press and hold top left button and u will see ' light on/off' on display. press bottom left button to set chime. press again watch will show 24hr/ 12hr and current time set on watch. 12hr/24hr should be blinking. press top right button to change to preferred hour. press bottom left button to navigate to hour, min,sec use right buttons to select numbers.

Aug 27, 2011 | Watches

1 Answer

How to set time and date on kenneth cole watch model a126-03 rk5033


I had 2 problems:
1- my watch was stuck in 24hr time format.
2- I didn't know how to turn the alarm off.

Solution for issue #1 (switching between 24hr and 12hr time displays):
You press both the upper right and lower left button at the same time's

Solution for issue #2 (turning alarm on/off):
You press both the upper right and lower right button at the same time, twice.

Apr 14, 2011 | Kenneth Cole RK5034 REACTION

1 Answer

I have a new invicta watch model number 6089 that I just recived yesterday. I can set the time and date but for some reason I can not set the 3 arm?? I have read the instructions and still it will not...


The trick to setting the 24hr hand on the 6089 is to pull the crown out only one notch (not two) before using the upper push button to change the time. As it's a 24hr hand, the best time to set it is at the top of the hour.

Feb 05, 2011 | Invicta Watches

1 Answer

Stuck on 24hr time setting


Hi dale_3fan,

You can change the time and day of your Armitron watch by following the steps below.

1. Press the MODE button once. This will put you in the timer.

2. Press and hold down the MODE button. This will put you in the alarm set display.

3. Press the MODE button once more and it will put you in the time set display.

4. Use the ST/SP button to change the blinking portion of the time. Then use RESET button to move you thru the different parts of the time/date.

Hope it helps.

Thank you for using FixYa.

Sep 24, 2010 | Armitron 40/8125BLK Digital Sport Watch

1 Answer

How do you set this watch....4 buttons


SETTING THE TIME AND DATE ON AN OLD 4 BUTTON DIGITAL WATCH



[L1] [R1]



[L2] [R2]



SETTING THE TIME.


Press [L2] to move through the modes. When the time display flashes, you are in the correct mode to set the time. The hours first, then the minutes and seconds.


Press [R1] to advance the numbers, [R2] to go to the next.

Press [L2] to save your settings. [L1] is not used; it's the light.


SETTING THE DATE AND DAY. After setting the time (seconds flashing) push [R2] to move though time, backwards, to date, [R1] to set day, [R2] to move to month [R1] to set the month. Push [R2] to get to the day of the week, then [R1] to change. [L2] to end.

Jul 26, 2010 | Fossil JR9455 Watch

1 Answer

How do i change my timex from military time


The owner's manual that was sold with it should guide you. If it's missing, get a good hand-lens. Take the watch under a good source of light, and aim the hand-lens to the edges of the watch. You should see 12/24hr button. Press the button once. The time should change from military. If it doesn't , press and hold the shortest button for about 5-seconds. Then press the button that is marked 12/24HR.

Oct 21, 2009 | Timex Indiglo Venom T53141 Chronograph...

13 Answers

Setting Bench Watch


Reset Instructions Bench. (BC0013BR)


Time and Location
If you hold in the light, start and the reset button for a few seconds a screen will appear with the 12h or 24 h clock setting and also the date and country.

Once you have that screen if you press the mode button it will move over the date and clock etc then you just press the reset button and start button to choose the date and time.

Once you have changed the date and time to the correct date press the light button, start button and reset button and it will save the settings.

Alarm
Hold in the light, start and the reset button for a few seconds a screen will appear
press the mode button it will move over the date and clock etc then you just press the reset button and start button to choose the date and time. Use the light button to set the screen.

Feb 27, 2008 | Watches

Not finding what you are looking for?
Watches Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76360 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...