Question about Tissot T-Touch T33159851 Wrist Watch

5 Answers

How to reset tissot t-touch after battery replace? I could not find the AC point,there is many points under the battery but not accsessible when the battery is inserted.

Posted by porhy on

Ad

5 Answers

Arturs Kalnins

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,338 Answers

AC point is not located under the battery. It is at the edge of movement. Get an eyeglass with good magnification and you will find it.
Rate me, please.

Posted on Aug 07, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There is a little dot on a small depressable lever near the bezel with a small arrow. Remove dead battery, push down on the AC point and push in the bezel. The led display will clear indicating a reset. It would be be linking with a dead battery. You can now insert the new battery and the led will show an unblinking time. Resync the watch and set time. You are good to go.

Posted on Oct 29, 2009

  • ookami2_17
    ookami2_17 Jan 30, 2013

    hi would this solution help if the "batt" still appears after a battery change? and could you be a bit more specific where the AC point is? Thanks

×

Ad

Watch4maker.com

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

I upload a video how can you change battery on Tissot Sea touch
The next Video is to reset hands or Hands Calibration

And the last is Error Key remove.
From Touch series from Tissot the way is the same.I try to make it in Touch Expert.

Posted on Apr 25, 2013

Rachid Ziane

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi Everybody,

Can you tell me where is the ****** f---ing AC point on tissot t-touch 2 expert please ?

After replace the battery, there is no more compass thermo and alti.

Thanx for your answer and photo please.

Posted on Mar 22, 2020

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Altmeter dosent show anything.I try touching + 2 sec when in altmeter function it blinks but i cannot make any arrangements about it.Non of + and - make any difference

Posted on Oct 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won`t start after battery change


Shortcut battery with AC contact. AC can be found on the sides of watch movement(very tiny). You have to use pointed tweezers: one end on battery+, another on AC contact for three secs....

Oct 06, 2015 | Tissot watch - T17.1.586.52 PRC 200...

1 Answer

Battery replacement is it a dealer only job?


This is a Myth my friend.Anyone can change a battery on Tissot T Touch.The First models have 2 steps the Battery Replacement and Synchronization.After the Tissot Expert add the Reset as third step.
In my blog i have instructions with video how can you do that.
www.watch4maker.com

Nov 24, 2013 | Tissot T33.1.588.51 T-Touch Dial

1 Answer

Reset a t-touch expert


Shortcut battery with AC contact. AC can be found on the sides of watch movement(very tiny). You have to use pointed tweezers: one end on battery+, another on AC contact for three secs
If you take a jeweler's lupe near where the arrow is you will see the word "reset" in the plastic.
There is a deep hole in the plastic with contacts below. That is the reset, and that is why you must use very sharp pointed tweezers to make contact with the back of the battery.

I think if you do not have sharp tweezers, you can probably put a sewing pin down the hole, and then connect with a small screwdriver to the back of the battery

Jan 30, 2013 | Tissot T-Touch T33159851 Wrist Watch

2 Answers

Tissot t-touch battery problem


If you take a jeweler's lupe near where the arrow is you will see the word "reset" in the plastic.
There is a deep hole in the plastic with contacts below. That is the reset, and that is why you must use very sharp pointed tweezers to make contact with the back of the battery.

I think if you do not have sharp tweezers, you can probably put a sewing pin down the hole, and then connect with a small screwdriver to the back of the battery

Jan 30, 2013 | Tissot T-Touch T33159851 Wrist Watch

3 Answers

How do I reset my tissot t touch expert


Steps to Synchronize the Hands
  1. Press the centre pusher (T). The watch should beep once.
  2. Touch the centre of the touch-sensitive face until opt appears, in opt select 24H Cm (or 12H Fft or 24H Fft or 12H Cm) is shown in the digital LCD display.
  3. Press and hold the centre pusher (T) for approximately 5 seconds. The watch will beep once and then again, a second time, after 5 seconds have passed. After the second beep, the digital LCD display should read SYNCHRO. If not, return to step one.
  4. Press the upper pusher (+) to advance the hour hand until it is positioned exactly at 12:00. (PH press T button to to switch to minute hand adjust)
  5. Press the lower pusher (-) to advance the minute hand until it is also positioned exactly at 12:00.
  6. When both hands are aligned together and pointing directly at 12:00, press the centre pusher (T) to save the setting. The hands of the watch are now synchronized

Jan 29, 2013 | Tissot T-Touch T33159851 Wrist Watch

2 Answers

Setting my Tissot touch Navigator 3000


Per the manual: http://support.tissot.ch/usersmanual/140-en.pdf
When your battery begins to die, the hands are no longer synced.
After replacing the battery, go into local time mode (pressing the center of the crystal) until "Set" appears. Press the crown. Scroll to "ECO BAT", press and hold the crown for 5 seconds until "SYNCHRO" appears. Use the "+" button to move the minute hand and the "-" to move the hour hand until they are in the upright or 12:00 position.
Either press the crown again or wait until the watch automatically leaves the Set mode. Your hands should now represent the local time.

Feb 08, 2010 | Tissot T Touch Navigator 3000 T96.1.478.32...

1 Answer

I need calibrate Tissot t-touch


Syncronisation sequence is in the user manual. syncronisation is as follows.. 1) Press T to activate touch system. 2)touch the screen centre to show units display. 3)hold T button for approx 5 secs till the hands point to 12o clock. 4)use the + & - buttons to control the minute and hour hands... you must syncronise them both to 12 oclock exactly. 5)when you have them both pointing to 12 exactly, press the T button to finish the sync. the hands will now go back to the time. If the hands often go out of sync, the battery is probably worn and will at some stage the 'bat' warning will appear. (this initially only flashes every 20 secs, so watch the display for over 20 secs to see the 'bat' warning. eventyually this becomes permanant display). Batteries normally last about 6 years

Jun 04, 2009 | Tissot T-Touch T33759851

1 Answer

How do I rest my Casio PAG-40 after I replaced the batteries?


You need to shortcut AC point and battery. Take tweezers and touch AC and battery (+) simultaneously. Use an eyeglass to find AC point. It is marked on the movement with letters AC.
Here is the link for easy watch setting:

http://world.casio.com/wat/download/en/manual/

Rate me, please.

Apr 04, 2009 | Casio Watches

1 Answer

BAtt flashing on digital screen although I only


Yes, the flashing battery icon tells you it's time to change the battery.
Despite of that the watches are fitted with brand new batteries when they are leaving manufacturer, there can be a significant period of time till they reach their new owners and the watch battery can be flat (or allmost flat) at the selling point.
I suggest you visit sellers shop again a.s.a.p. and ask for the brand new battery to be fitted under the warranty.

Rate me, please.

Mar 24, 2009 | Tissot T-Touch T33759851

4 Answers

Battery Change on T-Touch


there usually is an AC contact point to reset digital watches. Touching the + and the ac point with a conductive wire usually resets the watch. Not sure about the spring- I'm not going to open my Tissot up unless I have to.

Oct 28, 2007 | Tissot T-Touch T33759851

Not finding what you are looking for?
Tissot T-Touch T33159851 Wrist Watch Logo

14,975 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tissot Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Anonymous

Level 1 Expert

3 Answers

Vernon Taylor

Level 3 Expert

6178 Answers

Are you a Tissot Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...