Question about Furuno GPS
Downloading data from my FURUNO GP-30 gave me no problems. But it took me long time to figure out why I coudn't upload waypoints and routes to the GP-30 via the serial port in my ThinkPad T30.
I tried nearly everything tested the cable, tested a lot of different software and even wrote a little c-program to communicate with the serial port. I also tried a serial-to-usb converter with no results. Then I stumbled over this RS232 Tutorial. According to this - serial ports are not just serial port but can be divided into three general categories:
The types of driver ICs used in serial ports can be divided into three general categories:
* Drivers which require plus (+) and minus (-) voltage power supplies such as the 1488 series of interface integrated circuits. (Most desktop and tower PCs use this type of driver.)
* Low power drivers which require one +5 volt power supply. This type of driver has an internal charge pump for voltage conversion. (Many industrial microprocessor controls use this type of driver.)
* Low voltage (3.3 v) and low power drivers which meet the EIA-562 Standard. (Used on notebooks and laptops.)
Then I installed the waypoint upload software to my ten years old Compaq Presario and suddenly I could upload routes and waypoints but only via the on board serial port. The serial-to-usb converter didn't still work.
So if people experience no result trying to upload data to these old GP-30's from their notebooks and laptops. Then I think it could be a matter of these Low voltage ports not are able to provide the FURUNO device with enough voltage. See the above RS232 Tutorial.
Posted on Sep 01, 2008
SOURCE: I've just bought a boat
You can download one here:
Copy the entire link into your browser and you should have it. It is in PDF format, so if you need a PDF reader, go to www.adobe.com and get one for free.
Hope this helps,
Posted on Jan 07, 2009
Tips for a great answer:
http://www.offscotland.plus.com/Temp/GP30-GP35-Operator's_Manual.pdf The GP30/GP31/GP32/GP35 are all similar.
Oct 23, 2013 | Furuno GP31 GPS Receiver
May 30, 2011 | Furuno GP32 GPS Receiver
It's an ominous date to be looking for a manual! Has it stopped working or is it just the date that's wrong?
12 Dec 2010 is 'GPS week number rollover' for the GP-70 Mark 2. See www.furuno.co.jp/en/pdf/080531_notice_en.pdf for details.
Dec 12, 2010 | GPS
Mar 09, 2010 | Furuno GP31 GPS Receiver
Sep 07, 2009 | Furuno GP31 GPS Receiver
Mar 20, 2009 | Furuno GP31 GPS Receiver
Dec 06, 2008 | Furuno GP31 GPS Receiver
Aug 03, 2008 | Furuno GP31 GPS Receiver
Jul 26, 2008 | Furuno GP31 GPS Receiver
Jun 29, 2018 | Furuno GPS
156 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: