Question about Channel Master Televison & Video
Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Pull up older posts. If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.
Search these sites by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
Posted on Mar 24, 2019
SOURCE: How do I pause while recording?
As far as I can tell, and yes the documentation is skimpy, when you press the 'record/play' button the video recording pauses. Make sure you press the video icon button, not the 'record/play' button to get it started again. If you press the 'record/play' button, it goes into a 'play back' mode.
Hope this helps...
Posted on Dec 28, 2007
some weeks ago I got this really impressive deck (Teac Z 7000) from a colleague, and found the same problem. I fixed it, and the fix is not too complicated. It´s the potentiometers that do fail. All pots are from the same manufacturer (Alps) and construction. The problem is that the wisher is broken away from the holding plastic and will loose contact completely. You can check that with a normal ohmmeter: You´ll find the total resistance over the outer terminals but endless resistance from one of the outer terminals to the middle wisher contact. The values are: 100 kOhm linear for each of the upper left pots (fader,space), 2x22kOhm pos.log. for the lower left pot (phone volume). So, what does a broken wisher at the "fade in" pot do? The Recorder "thinks" that You selected an "endless" fade in time, and the result is : no record level. You can do an easy "quick and dirty" fix just to see if that´s the problem: Hold- or better solder- a say 47kOhm resistor in parallel to the conducted potentiometer terminals and try to record.
4 of 5 pots have been defective in my deck, and I´ve replaced them with standard types from my local electronic supplier (Conrad electronic, has a shop in Frankfurt/Main). Well, the new parts didn´t fit perfectly, I used a file to get them in (not visible from outside). Also I lost the possibility of pushing the knobs in and out, but that is not a really problem.
I assume this fix might also help owners of the Teac Z-6000 and Z-5000, which- most probably- use the same type of potentiometers.
This text was written by Boris Witke, Kelsterbach (near Frankfurt/Main), Germany. E-Mail:
[email protected] Please tell me if You were successful, possibly we get lucky users of these really fascinating machines.
Posted on Feb 24, 2009
SOURCE: my dvd player remote wont work!
More than likely the code for the remote/dvd player was reset accidently and is now incorrect.Refer to page 19 of your manual for instructions on how to set the correct code for your remote.
You can download your manual here if needed..
Post back if that does not work, and I will try to help you.
Thank you for trying Fixya!
Posted on Mar 29, 2009
SOURCE: the mic does not record stereo
This Mic is not a stereo Mic. If you're using a windows computer, check your sound control panel to see if the mic wasn't suddenly set to two channel device.
Posted on Oct 25, 2009
Tips for a great answer:
Jan 30, 2014 | Sony Minidisc Mini Disc Remote Control...
Dec 15, 2011 | Humax Televison & Video
Aug 30, 2011 | Olympus VN-1800 Digital Voice Organizer
Aug 18, 2009 | Televison & Video
Jan 04, 2009 | Sims SVR-S825 Handheld Digital Voice...
Aug 20, 2008 | Televison & Video
Jun 09, 2008 | Tascam CD-RW4U CD Recorder
Dec 26, 2007 | Jazz DV-179 Digital Camera
67 people viewed this question
Usually answered in minutes!