Question about Samsung Televison & Video

1 Answer

Hope you can help. I have Samsung UN60F6300 and the bottom half of the screen flickers on and off. Same in any mode or input. No settings improve the situation. Thank you

Posted by Anonymous on

Ad

1 Answer

jws1013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,708 Answers

It would be best to contact the manufacturer or TV repair facility. This is a car forum and we wouldn't have the right info.

Posted on Mar 23, 2019

Ad

5 Related Answers

acdr

kishor khatri

  • 1913 Answers

SOURCE: My Screen!!!

hi
restatrt your system and press F8 KEY UNTILL U GET MENU.

then go to best configuration or safe mode.

then if u get normal window change your display resolution to 800x600 or 1024x768.if u get differ reso.
restart in normal mode u get good display in original content.
pls notify this solution

Posted on Mar 23, 2008

Ad

Chi Chu

  • 8457 Answers

SOURCE: samsung lnt4069f

Take out incomming signal input,recheck.Put input back,same problems.Than ur Main Tuner Signal board is the cause.

Posted on Jan 15, 2010

jimnuggats

  • 644 Answers

SOURCE: Bottom screen on ds lite flickers

check the cable first it might not be in the ribbon connecter properly, if everything looks ok chances are youll need to replace the screen.

Posted on Jan 17, 2010

budmrtn

Bud Martin

  • 11361 Answers

SOURCE: Asus AL2216W top half screen got darker. Lamp problem ?

When the lamps are bad, the screen will shut down if the inverter cricuits is sensing open (lamps will not fire up and conduct, or lamps are drawing too much current). You should open it up and inspect the caps in the power supply first, lamps in this monitor are ntoeasy to replace (screnn will to be complete,ey disassembled.

http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Posted on Apr 24, 2010

Testimonial: "Thanks for the quick answer will try to check the caps and not bother with the lamp"

a b

  • 58 Answers

SOURCE: bottom half of screen black-out

I would replace the lower Y buffer. Part number 996500032640. Goodluck.

Posted on Jul 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV screen is blue


Symptom of no signal. Check the input connections. If found OK, check and replace the Tuner. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/

Jan 29, 2016 | Samsung UN60F6300 60" LED 1080p Smart HDTV...

1 Answer

Tv screen has white line flicker at bottom occasionally


Could be either a vertical adjustment (set or box) or the panel being misdirected by something in the set (digital control problem)

You might also want to see if happens on all inputs and Even call (Samsung?) to see if this is a known issue with this model.

Apr 08, 2012 | Samsung Televison & Video

1 Answer

My samsung star s5233a toch didnt work specially the lower bar where contacts menu and are present while the widgets work


you should be able to calibrate the touch screen.
You can calibrate the screen so that your phone recognises the input better. 1. In Menu mode, select Settings → Phone settings → Calibration. 2. Tap the target on the screen. 3. Select Yes.
hope this helps.

Aug 08, 2010 | Samsung Star GT-S5233 Cell Phone

1 Answer

Bottom half of the screen flickers and goes black


Hi
I would suspect this to be the lower Y Buffer board, with the back removed of the set it is on the far left hand side( lower ) and coonects via ribbons to the screen, get the part number off the board and Google or Ebay for a replacement.
Hope this helps

Apr 05, 2010 | Philips 42PF7220A 42 in. Plasma Television

1 Answer

I have a Samsung LCD TV, model # LN40A450 with a PC input. I connected my Dell Vostro 1310 laptap to the PC input and I consistently get a "Mode Not Supported" message on the TV screen. Why? I had a...


You TV will only accept specific signal formats (modes) through the PC input. Check you user manual for compatible modes. You then need to set screen 2 (your laptop VGA output) to 1 of the compatible formats (PC display settings). A common format/mode example would be 1024 x 768. Try it out and see if you get a picture. You can then increase the resolution 1 at a time to find the best format/mode for your purposes. I hope this was of some assistance.

Dec 29, 2009 | Samsung LN40A450 LCD TV

1 Answer

White pixels cover half of the bottom part of the screen


You probably have faulty lcd panels inside the tv. replacing them can cost alot of money. I assume you have tried different inputs? If the dots are in excactly the same place then the lcd panels or lcd controller are faulty.

Jun 16, 2009 | Samsung Televison & Video

2 Answers

My Screen!!!


hi
restatrt your system and press F8 KEY UNTILL U GET MENU.

then go to best configuration or safe mode.

then if u get normal window change your display resolution to 800x600 or 1024x768.if u get differ reso.
restart in normal mode u get good display in original content.
pls notify this solution

Mar 23, 2008 | Toshiba Satellite R10-S802TD Tablet PC

1 Answer

Green Tint in HDTV for the first few minutes.


Possibly adjustments to the service menu could rectify this. Also, adjustments must be made to customer settings in menu for each input. In the past I have improved or solved this by making service adjustments, however, if you attempt this, please make sure you know what you are changing and make sure you are in 1080i mode. Service code (mute,1,8,2,power on)vol+ and vol- to select an item. Use mute and the menu to adjust. Use add to save the settings. Take your time. Hope this helps.

Mar 11, 2008 | Samsung HCL5515W 55" Rear Projection...

1 Answer

LN-T4665F 46 in. LCD- Black Line across screen


The set is under a year old and is under warranty. The LVDS cable inside these sets have a history of coming loose. The problem could be the panel. Either way, the set is the problem and needs to be looked at. This set is worked on in the home and does not need to be taken to a shop, so, you can still use it. Contact Samsung at: 1-800-SAMSUNG Hope this helps.

Jun 03, 2007 | Samsung LN-T4665F 46 in. LCD Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...