Question about Hitachi Televison & Video

Open Question

How do I fix my Hitachi air condition remote control After changing the batteries of the remote, the screen only shows the number 3. Any suggestions?

Posted by Joan Reimers on


5 Related Answers


  • 1 Answer

SOURCE: living solutions giant remote control 3-in-1, A17G0510 (Item606426)

I had trouble programing the living solutions giant remote - c17g0801.
But after many times serching I ran across a genius' resolution (maybe it was 2 genius') -
Jumbo Remote:
Make sure you have device turned on.

Hold the device button you want to program for 3 seconds & release.

Push & release the power button & the red light will remain lit.

Push the CHANNEL UP button over & over slowly until the device turns off.

When device turns off press OK button.

Posted on Nov 16, 2008



  • 2 Answers

SOURCE: Remote control not functioning properly

buy yourself a GE 94221 universal remote (Home depot $6) and use DVD code 0947 to control the Coby dvd 224.

Posted on Jun 10, 2009



  • 400 Answers

SOURCE: Changed batteries and climate control not working properly

The actuator has gone bad. They can be programed, and reset, but usaly they are bad, and that will only patch the problem for a while.

Posted on Jun 19, 2009


  • 1 Answer


abhay .hi their is a problem in my remote

Posted on Feb 08, 2010


syaiful ridlo

  • 112 Answers

SOURCE: My Hitachi Utopia air con shows fault condition AO

it must replace the controller in macine, must service in developer/distributor center

Posted on Jan 22, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Tried to reset DMPBD79last step it shut off it wouldnt turn back on I just get a blinking redlight.

This is for a diff. model but give it a try, they may be diff. #'s showing up then what pops up on screen then is listed below.

  1. Remove any disc from the drive and switch the device to stand-by
  2. Press and hold [OK], [BLUE] and [YELLOW] simultaneously on the remote control until the device turns on and shows "00 RET" on the display
  3. Repeatedly press [RIGHT] on the remote control until the device shows "08 FIN" on the display
  4. Press and hold [OK] on the remote control for at least 3 seconds -> The device will reset itself to factory condition and show "HELLO" on the display
  5. Press [POWER] button on the remote control -> The device will shut down

May 02, 2016 | Panasonic Televison & Video

1 Answer

My Hitachi rc1910 remote control keeps heating up excessively to a point where the plastic on the batteries starts to melt

There should be a short circuit inside the remote control. Check it. Contact any service technician.

Feb 12, 2013 | Hitachi CLU-5713TSI Remote Control

1 Answer

3 digit channel numbers logitech 900

1) change the batteries by new one type alkalines
2) Retight the springs contact with plier very well for a GREAT contacts.
3) Clean the contacts with special spray contacts.
4) Resolder the wires contacts.
4a) RESET the code or download form or www.
5) Otherwise you must open the remote, for clean the keypads very well with alcohol isopro. or you must go to the repair shop.
God bless you.

May 12, 2012 | Logitech Televison & Video

1 Answer

Hitachi AC's remote control sensor not working

Hitachi AC's are now made with "bovine ***** material" quality. we have two brand new AC's neither is working now. Remotes are not sensing at all. Hitachi is "bovine ***** matter" now.

Apr 05, 2012 | Heating & Cooling

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76352 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides