Question about Samsung Office Equipment & Supplies
Verify the paper tray sensor actuator,the problem is or actuator brocken or paper part jammed under sensor and blocking the actuator.
Posted on Mar 31, 2019
I had this problem too. For me the answer turned out to be the paper sensor in the back part of the machine, behind the little back door just under the top part of the machine. This sensor hangs down from a thin rod that runs across the width of the machine, and is held in place by a small spring that encircles the same rod that supports the finger. The finger had apparently gotten moved so the spring was dislodged from its proper place. I was able to rotate it around the rod with my finger & get the spring moved back to where it should be. This seems to have cleared the problem--I'm keeping my fingers crossed.
Posted on Feb 04, 2008
SOURCE: tools reset samsung scx 4623f
ahi te pueden ayudar con el reset definitivo de la 4623f v99!!
there they have the solution for the samsung 4623f v99!!
Posted on May 24, 2011
SOURCE: I got 02-000 error on
This error is a fuser malfunction. You will need to replace the fuser
unit in order to get this running again. A fuser unit will run about $90
for a refurbished unit.
In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.
Posted on Jun 01, 2011
Tips for a great answer:
Mar 09, 2015 | Samsung SCX 4623F - multifunction fax /...
Jul 07, 2014 | Samsung SCX4623F Laser All-in-One Printer
Aug 26, 2013 | Samsung SCX 4623F - multifunction fax /...
Jan 19, 2010 | Office Equipment & Supplies
Nov 06, 2009 | Samsung SCX 4200 All-In-One Laser Printer
Nov 13, 2008 | Samsung SCX 4200 All-In-One Laser Printer
50 people viewed this question
Usually answered in minutes!