How to reset sony vpl fx40 projector lamp wont light.

SOURCE: Reset Timer Lamp Sony VPL-HS60 projector

To reset the lamp timer:
1) With the projector plugged in and turned off, press the 'ON/STANDBY' button to put the projector in 'STANDBY' mode. NOTE: You have to press the button on the projector itself, you cannot use the remote for this step (this is not clear in manual).
2) Now, using the remote, press the following keys in order: RESET, <--, -->, ENTER.
3) Timer should now read '0'.

Posted on Feb 02, 2008

SOURCE: Lamp will not come on

try pressing and holding the enter button on the projector for about 30 seconds - this resets it. It worked for me!!

Posted on Feb 20, 2008

SOURCE: Lamp time resetting

HI
Not sure if its in the handbook but you can download a copy from here

http://safemanuals.com/user-guide-instructions-owner-manual/SONY/VPL-CS5-_E

Posted on Feb 21, 2009

SOURCE: how to reset lamp on sony lcd projector xga vpl-px20

Hi,
After replacing lamp, connect projector AC power cord and turn the projector in standby mode.

Press following keys on control panel for less then 5 seconds each..
RESET, <==, ==>, ENTER.
That will reset lamp timer in projector.
Thanks.

Posted on Jun 01, 2009

BlackOnyx

• 104 Answers

SOURCE: sony vpl-hs20 cineza projector- reset lamp counter

These instructions are for a Sony Cineza VPL HS3, but may be the same for the HS3.
1st thing to check - is the cover properly/completely closed - this can stop the projector from working.
Connect the power and set the projector to standby mode.
Press these buttons on the remote control in this order, for less than 5 seconds each.
Reset - Left Arrow - Right Arrow - Enter

This is required, to reset the lamp timer.

Also, something I found interesting from the internet - lamp life isn't when the bulb dies, but when a bulb has lost 10% of its brightness - so you might well be able to reset the timer and get much more use from the bulb - the image just wont be as bright.

Posted on Feb 06, 2010