Question about NordicTrack Exercise & Fitness
Try this calibration procedure.
Turn the power switch on. Remove the safety key. Hold the Stop and Speed Up or Speed Plus buttons down then insert the safety key.
The display should show some numbers.
Press the stop key one time and the display should show some other numbers and some 00's. Press the Incline Up button and see if the Incline begins to move, if it does let it go all the way up and then all the way down, wait a few seconds after it stops, then hit the stop key 4 times. It should be calibrated. If it didn't move then the board or the incline motor is bad.
Posted on Jul 08, 2009
this function is to give a little more intensity exercise, while helping to raise the heart rate and thus burn fat. watch it more practical as a stress test.can use the runner at a speed of 3.5 mph and an elevation of 7.5 of inclination and see good results
Posted on Feb 09, 2010
Manuals can be downloaded at http://www.iconservice.com/CustomerService/manuals
First perform an incline calibration.
Insert the safety key/magnet. Press the incline up button. While the numbers are changing, remove the key. Release the incline up button and reinsert the key/magnet. The machine should go to the top and then back to the bottom.
If it only starts then stops, the incline sensor may be defective. Be sure all the plugs are secure on the controller board.
If the sensor is defective, you will need to order a new incline motor..
If the incline motor does not move at all, the controller may be defective..
Posted on Dec 15, 2010
Watch this videos+ tip:
Posted on Nov 09, 2011
Tips for a great answer:
Oct 03, 2016 | NordicTrack Exercise & Fitness
Mar 29, 2015 | NordicTrack Exercise & Fitness
Nov 01, 2014 | Exercise & Fitness
Aug 31, 2014 | Nordic Track NordicTrack Treadmill, A2550
Jan 21, 2018 | Nordic Track Exercise & Fitness
Jul 12, 2012 | Nordic Track NordicTrack A2550 PRO...
Dec 15, 2010 | Nordic Track NordicTrack A2350 Pro...
May 31, 2009 | Nordic Track Nordictrack Apex 4100i...
510 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: