Question about HP ProCurve 4104gl Networking Switch
Here's what you need to do:
First, be sure to assign an ip address(in the proper subnet) to each VLAN.
Second, use the ip helper-address command in the context of each VLAN, the address used should be the address of the DHCP server
Third, Add a scope for each additional VLAN on the DHCP server.
The switch will route the DHCP request to the proper server based on the ip helper-address command parameter and based on the ip address of the VLAN that is passed tot he server, a DHCP address in the proper subnet is automatically configured.
Here is a sample:
ProCurve Switch 3500yl-24G-PWR# configure
ProCurve Switch 3500yl-24G-PWR(config)# vlan 33
ProCurve Switch 3500yl-24G-PWR (vlan-33)#ip address 192.168.33.254/24
ProCurve Switch 3500yl-24G-PWR (vlan-33)# ip helper-address 10.1.2.250
Posted on Aug 08, 2009
Tips for a great answer:
Sep 13, 2013 | Zyxel ES-2108 8PORT 10/100BT MAN L2 SWITCH...
Nov 01, 2010 | 3Com 4500 24-Port Ethernet Switch
Sep 20, 2010 | HP ProCurve 2626 (J4900B) 24x10/100 Mbps...
May 17, 2010 | Cisco 7940G IP Phone
Nov 30, 2009 | HP ProCurve 2626 (J4900B) 24x10/100 Mbps...
Mar 27, 2009 | Zyxel IP Express IES-1000 (91004098002)
Feb 01, 2009 | Cisco Catalyst 3750E-48PD
May 22, 2020 | Power Computers & Internet
1,568 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: